1.PU Foam with excellent adherence and insulating capacity 2.Can be cut and painted 3.Be available with straw and gun type
JOINFLEX 202 High Performance PU Foam
PRODUCT DESCRIPTION
JOINFLEX 202 High Performance PU Foam is a one-component, self-inflated, high extrusion capacity, multi-purpose Polyurethane foam, which will expand and cure by moisture in the air.
JOINFLEX 202 High Performance PU Foam has good adhesion for most materials and excellent filling properties, installed capacity, stability.
Cured product provides excellent thermal and acoustical insulation. It is mould proof, resistant to heat and cold (-60ºC to +100ºC), and moisture-resistant.
FEATURES
Can be cut and painted
High adhesion to most building materials
Excellent gap filling properties
Good insulation characteristics
Filling joints cracks and gaps in insulating panels and sheets
Excellently suitable as foam for sealing and connecting precast concrete well shaft rings.
Quick-curing foam with excellent adherence and insulating capacity
It contains CFC-free propellants which are harmless to the ozone layer.
TECHNICAL DATA
As Supplied – tested at 23°C±2°C, RH50%±5%:
Item Data
Aspect Compressed Liquid
Consistency Stable Foam
Totally Cured Time, H 24
Tack-Free Time , min 7~15
Drying Time, min 15~30
Yield (expansion rate) , 60~80
Service Temp, °C -60 ~+100
Application Temp, °C +5~+35
As Cured–tested at 23°C±2°C, RH50%±5% 7 days :
Cutting Time, min 8~20
Volume Shrinkage, % ≤2
Post Expansion None
Cellular Structure 60~65% open cells
Gravity, kg/m³ 15~22
Compressive Strength, kPa ≥120
Tensile Strength ,kPa >35 (10%)
Adhesive Strength, kPa ≥100
Fire Class (DIN 4102 ) B3
Insulation Factor, Mw/m.K <35
Water Absorption (ML) 2~3(no epidermis)
<0.5(with epidermis)
CFC content,% None
Toxic content,% None
APPLICATIONS
JOINFLEX 202 High Performance PU Foam is recommended for a wide range of applications: insulating, mounting, bonding, soundproofing and sealing.
JOINFLEX 202 High Performance PU Foam is also suitable for mounting of windows and doorframes
- heat insulation of water-pipe network, sewerage and central heating
- mounting and insulating wall panels, corrugated plates, roof tiles, etc.
- soundproofing and sealing of division walls, car and boat cabs
- joining prefabricated wood elements in frame constructions
- heat insulation of roof constructions
APPLICATION LIMITS
JOINFLEX 202 High Performance PU Foam is not suitable for adapting to structural fitting and following situations:
1. To all surfaces that bleed oil, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfurized fat and to surface where is wet;
2. To the substrate that the surface temperature exceeds +50°C or apply at temperatures below 5°C;
3. Use in the manufacturer of IG units;
4. To the painted surfaces, may cause seal failure as the paint cracking or stripping;
5. To the surfaces that with direct touch of food.
6. Do not use for structural glazing.
7. Not recommended for continuous water immersion applications.
8. Not recommended for use in below ground joints or trafficable
9. Joints where abrasion and physical abuse are encountered.
10. Not recommended for some plastics such as plastic, paper, and fabric.
HOW TO USE
APPLICATION TEMPERATURE: +5°C to +35°C
Cleanse with a cleaning agent, to keep the substrate surfaces completely clean(JOIN LEADER also provide the cleaning agent for your convenience).
Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. (Notice that the two can’t be mixed use together, and the second cloth will be better purified cotton and no picking.)
Fill vertical gaps from the bottom up (pay attention to foam expansion).
Turn off the flow adjustment screw clockwise direction when finishing.
Before curing, foam can be moved and cleaned with PU cleaner either with the gun or with adapter.
Cleaning of the screw adapter with cleaner is recommended.
Do not expose to UV rays. Painting or coating is recommended.
SHELF LIFE
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 27°C.
Always keep the can with the valve pointed upwards.
COLOR
Light Yellow, White
PACKAGING
750ml/can, 500ml/can
Straw type and Gun type.
High Performance PU Foam
