Aluminium profile 1,High quality with different finish 2,Advanced Itally technology vertical coating mach 3,good packing
1,Aluminum alloy guide
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Remain |
6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.4-0.6 | 0.1 | 0.1 |
| 0.15 | aluminum |
6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.05 | 0.15 |
| 0.15 | aluminum |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 |
| 0.15 | aluminum |
6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 |
| 0.15 | aluminum |
2,Capacity introduction
extruding press | 17 press,from 650ton-2500ton |
Alloy available | above alloys are available subject to final design |
Temper avaiable | T5,T6 |
Finish available | Anodizing,eletropharesis,powder coating,wooden finish,buffing,polishing |
Maximum size available | Outside diameter of 220cm |
Monthly capacity | 4000 Ton |
3,Finish introduction
Mill finish | Finish of aluminum itself,with a natural anodic layer formed in the air,week corrosion resistance |
Anodizing | Through an eletrical process to form a certain layer of anodic layer on the surface of profile,available in different colors,including silver,champagne,bronze,dark,golden,etc |
Eletropharesis | Base on anodized process,an extra transparent film is formed to make the surface clearer and look bit of shining,with very good corrosion resistance. |
Powder coating | The powdered paint is electrostatically charged and sprayed onto the part,to form a thick layer to protect the surface.with very good corrosion resistance |
Wooden finish | New technology in finishing to form a texture look like real wood.Handtouch or film transfering are both available |
Polishing | By buffing and chemical process to form mirror like finish,suitable for decorative application |
curtain wall aluminium profile
