Detailed Product Description
Composite Hose, chemical hose
Composite Hose, chemical hose is a multi-layer thermoplastic hose made around several PTFE liners and supported by unique extra resistant inner wires: PVDF coated Stainless or Titanium for maximum safety. A weather-proof and abrasion resistant outer cover made of Polymeric coated Polyester fabric is supplied as a standard. Outer cover is also available in a special PU coated fabric for a superior UV,Ozone, Sunlight, weather and abrasion resistance. It includes in the construction an FEP tubular extruded film to avoid any possible leak and guarantee a gas-tight construction. All the different layers are wrapped together and tensioned between internal and external wire spirals.This enables our product to meet the special requirement of the chemical industry.
WIRE: AISI 304 Stainless steel internal wire (S)
Galvanised carbon steel outer wire (G)
Also available with 304 Stainless Steel external wire 316(X) on request.
COLOUR: Red/Black/Blue
It is manufactured according to the requirement specified by the European Standards EN 13765:2003 Type 3 (BS5842:1980).Extremely flexible, easy to handle and bend, It is a specific hose designed for the transfer of aggressive acids and alkalies, MTBE, cloronated hydrocarbons, aromatic fuels, alcohols, and petroleum products under heavy pressure. Be widely used in ship, barge, loading and unloading; storage tank ,chemical industry , in-plant and terminal service. | ||||||||||||
Safety | ||||||||||||
The hose assemblies are tested at 1 ½ times rated working pressures for safety and reliability, in accordance with BS 5842:1980 clause 6.4(EN ISO 1402). Full test certification can be supplied on request.The working pressure is based on a safety factor of 4:1 Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms,as required by BS 5842:1980 clause 6.2 (EN ISO 8031) ,with a special outer antistatic black cover. | ||||||||||||
Work Temperature | -30~+100 | |||||||||||
| ||||||||||||
MODLE | SIZE | Maximun W.P | Min Burst (ENISO 1402) | Bend Radius | Weight | |||||||
| mm | Inch | Bar | PSI | Bar | PSI | mm | Inch | KG/mt | Lb/Ft | ||
CSGT-030H | 75 | 3 | 14 | 220 | 60 | 800 | 260 | 10 | 3.0 | 1.7 | ||
CSGT-040H | 100 | 4 | 14 | 220 | 60 | 800 | 400 | 16 | 5.0 | 3.3 | ||
CSGT-050H | 150 | 6 | 14 | 220 | 60 | 800 | 600 | 24 | 14 | 9.3 | ||
CSGT-080H | 200 | 8 | 14 | 220 | 60 | 800 | 800 | 31.5 | 22 | 14.7 | ||
CSGT-100H | 250 | 10 | 14 | 220 | 60 | 800 | 1100 | 43.3 | 27 | 18 | ||
End Fitting: Males(BSP/NPT) Females Flang(ANSI/DIN/GB)
Each hose assembly is permanently marked on the ferrule at one end according to EN 13765:200, EN13766, BS5842, BS3492, BCH, CMO, CCS, Bv and so on.
