seamless copper water tube, China seamless copper water tube Supplier,Factory

seamless copper water tube

Wuxi Huatong Copper Co., Ltd. [China]

1.Copper water tube have two kinds, one is straight, the other is pancake coil. 2.The length of coil we can make is 15 meter.

1.Product name: seamless copper water tube

2.Material:TP2(C12200), Cu-99.90%min, P-0.015 to 0.040%

3.Outside Diameter we can make: 3-60mm

4.Wall thickness we can make: 0.2-5mm

5.Length:The standard length of straight copper water tube:20ft(6.096m), the length of pancake coil copper tube we can make is 15m.

6.Dimensions, Mass, and Tolerances in Diameter and Wall Thickness for Copper Water Tube

-Type A

Nominal or Standard Size,mm	Outside Diameter,mm	Average outside diameter tolerance,mm		Type A		Theeoretical Mass, Kg/m
Nominal or Standard Size,mm	Outside Diameter,mm	Annealed	Drawn	Wall Thickness	Tolerance	Type A
6	6.0	0.05	0.03	0.80	0.08	0.117
8	8.0	0.05	0.03	0.90	0.09	0.179
10	10.0	0.05	0.03	0.90	0.09	0.230
12	12.0	0.06	0.03	1.2	0.1	0.364
15	15.0	0.06	0.03	1.2	0.1	0.465
18	18.0	0.06	0.03	1.2	0.1	0.566
22	22.0	0.06	0.03	1.6	0.15	0.917
28	28.0	0.07	0.04	1.6	0.15	1.19
35	35.0	0.10	0.04	1.6	0.15	1.50
42	42.0	0.10	0.05	1.8	0.2	2.03
54	54.0	0.10	0.05	2.1	0.2	3.06
67	67.0	0.12	0.05	2.4	0.25	4.35
79	79.0	0.12	0.05	2.8	0.3	5.99

-Type B

Nominal or Standard Size,mm	Outside Diameter,mm	Average outside diameter tolerance,mm		Type B		Theeoretical Mass, Kg/m
Nominal or Standard Size,mm	Outside Diameter,mm	Annealed	Drawn	Wall Thickness	Tolerance	Type B
6	6.0	0.05	0.03	0.70	0.07	0.104
8	8.0	0.05	0.03	0.80	0.08	0.162
10	10.0	0.05	0.03	0.80	0.08	0.207
12	12.0	0.06	0.03	0.90	0.09	0.280
15	15.0	0.06	0.03	1.0	0.1	0.393
18	18.0	0.06	0.03	1.0	0.1	0.477
22	22.0	0.06	0.03	1.1	0.1	0.646
28	28.0	0.07	0.04	1.2	0.1	0.903
35	35.0	0.10	0.04	1.4	0.15	1.32
42	42.0	0.10	0.05	1.5	0.15	1.71
54	54.0	0.10	0.05	1.7	0.15	2.50
67	67.0	0.12	0.05	2.0	0.2	3.65
79	79.0	0.12	0.05	2.3	0.25	4.95

-Type C

Nominal or Standard Size,mm	Outside Diameter,mm	Average outside diameter tolerance,mm		Type A		Theeoretical Mass, Kg/m
Nominal or Standard Size,mm	Outside Diameter,mm	Annealed	Drawn	Wall Thickness	Tolerance	Type A
6	6.0	0.05	0.03	0.60	-	0.091
8	8.0	0.05	0.03	0.60	-	0.125
10	10.0	0.05	0.03	0.60	-	0.158
12	12.0	0.06	0.03	0.60	0.06	0.192
15	15.0	0.06	0.03	0.70	0.07	0.281
18	18.0	0.06	0.03	0.70	0.07	0.340
22	22.0	0.06	0.03	0.80	0.08	0.476
28	28.0	0.07	0.04	0.90	0.09	0.685
35	35.0	0.10	0.04	1.1	0.1	1.05
42	42.0	0.10	0.05	1.2	0.1	1.37
54	54.0	0.10	0.05	1.5	0.15	2.21
67	67.0	0.12	0.05	1.6	0.15	2.94
79	79.0	0.12	0.05	1.8	0.2	3.90

7.Application:

-for general plunbing

-similar applications for the conveyance of fluids,

-commonly used with solder, flared, or compression-type fittings.

-the type of copper water tube suitable for any particular application is determined by the internal or external fluid pressure, by

the installation and service conditions, and by local requirements.

-Note: Annealed tube is suitable for use with flared or compression fittings, and with solder-type fittings, provided rounding and sizing of the tube ends is performed where needed.

-Note: Drawn temper tube is suitable for use with solder-type fittings. Type A and B tube, in the drawn temper, are suitable for use with certain types and size of compression fittings.

8.Packing:

-straight copper tube is bundled with plastic bag, then put them in the wood box.

-pancake coil copper tube is packed in the plastic bag, then put them in the carboard box.

9.The picture of copper water tube

-straight copper water tube

-pancake coil copper water tube

seamless copper water tube