Welcome to ECBAY
Common rail system repair tester for test bench
Common rail system repair tester for test bench

CR System Repair Tester CRS-2000 can be used on a test bench, it targets Denso CR systems with an ECD-U2 pump.

CR System Repair Tester CRS-2000 can be used with a test bench, it targets Denso CR systems with an ECD-U2 pump. CRS-2000 simulates the Denso engine ECU, to drive two solenoids on an ECD-U2 pump and solenoids of 6 CR injectors.

A standard high pressure pump test bench with a CR system tester CRS-2000 will achieve most tasks for repairing a Denso ECD-U2 system and the components, such as injection quantities, injector fuel return, nozzle injection spray atomization, pump condition and fuel rail pressure control.

Design Features

The CRS-2000 meets the synchronization requirement todrive an ECD-U2 pump and 6 injectors.Pump operation- Close-loop control of rail pressure to reach the required rail  pressure- Manually adjust pump load Injection operation - Synchronous fuel injection with the ECD-U2 pump - Manually adjust fuel injection frequency- Adjustable pulse width of injector driving signalShort circuit protection for the output circuitry of the solenoid driving signalRich accessories, ready to test a DENSO ECD-U2 system

Common rail system repair tester for test bench

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.