1.enameled aluminum wire temperature class:130,150,180 2.enameled types: ,UEW, PEW,EIW,AIW 3.certification: ISO9001:2008
Enameled aluminum round wire is a type of winding wire made by electric round aluminum rod which drawn by dies with special size, then over coated with enamel repetitiously.
The advantages of Enamelled round aluminum wire 1. Compared with the copper enameled wire, enameled aluminum wire is easier to winding, also there is a solid oxide film on the surface of enameled aluminum wire, which make it has a good insulating effect, a long life. 2. Due to the good insulating effect of aluminum film layer, it's heat-resistant temperature can be 20 degrees higher than the copper wire; 3. The greatest benefit of using aluminum is that it is 1 / 3 lighter than copper which significantly lower the production costs, second it can attach to the solids easily, and third it can also reduce the freight and transportation during the operation. Field of application . Microwave transformers; . Requirements for the production of light weight, relatively high conductivity, heat resistance and good windings, especially the transmission of high frequency signal windings; . Magnet wires uesd in high-frequency voltage devices, common transformer, inductance coils, electromotors, household electrical and micro-motors; . Enamelled wire uesd in small-motor rotor winding. etc. . Magnet wires uesd in monitor deflection coil . Magnet wires uesd in degaussing coil . Other special magnet wire
Executive Standard Company standard Q/320292AAAB01-2009 Product types Class 130(155) Polyester Enamelled round aluminum wire Class 180 polyesterimide enamelled round aluminum wire Class 200(220) polyesterimide over-coated with polyamide-imide enamelled round aluminum wire Manufacturing scope Copper conductor diameter: 0.20mm~3.50mm If required size out of above scpoe, please contact with us. Product introduction Paper covered wire is a type of winding wire made by oxygen-free copper rod or electric round aluminum rod which drawn or extruded by dies with special size, then wrapped with special insulation materials. Mainly be used in windings of oil-immersed transformer, reactor, and other electric devices. Product types 1. Peper covered rectangular copper(aluminum)conductor, 2. Paper covered round copper (aluminum) conductor, 3. Peper covered rectangular hardened copper conductor, 4. Special insulation materials covered rectangular copper(aluminum) conductor. Manufacturing scope Peper covered rectangular copper(aluminum) conductor: Thickness a: 1.00mm~10.00mm Width b: 3.00mm~25.00mm Paper covered round copper (aluminum) conductor: 3.00mm ≤ Conductor diameter d ≤ 6.00mm Rectangular hardened copper conductor: Thickness a: 1.00mm~2.50mm Width b: 5.00mm~15.00mm If required size out of above scpoe or select other different types, please contact with us.
PEW | |
Thermal | B 130 F 155 |
Standard | Q/320292AAAB01-2009 |
Application | Fan, air-conditioner, electric tool, washing-machine, micro-motor, explosion-proof motor, ballast, dry-type transformer and other windings in electrical tool. |
Features | Natural color |
Excellent resistance to abrasion and solvent, excellent electricity performance | |
Polyester-imide Enameled Aluminum Wire (PEW/EIW ) | |
Type | QZY |
Diameter | Round Aluminum Wire : 0.2mm-3.50mm |
Thermal | H 180 ºC |
Standard | Q/320292AAAB01-2009 |
Application | electric tool, washing-machine, compressoranti-explosion motor, deflection yoke, electrical instrument winding |
Features | dish brown colorExcellent heat shock, adherence and flexibility, high cut through |
Polyester-imide Overcoated With Polyamide-imide Enameled Aluminum Wire(EIW/AIW/PEW) | |
Type | QZY |
Diameter | Round Aluminum Wire : 0.2mm-3.50mm |
Thermal | HC(200ºC) C(220ºC) |
Standard | Q/320292AAAB01-2009 |
Application | Electric tool, washing-machine, compressor,anti-explosion motor,deflection yoke,electrical instrument winding etc,deflection yoke and other high-speed winding |
Features | Dish brown colorExcellent performance in resistance to heat shock, chemical, solvent, |
Test report:
WUXI FENGQUAN ELECTRIC CABLE AND WIRE FACTORY | ENAMELLED ALUMINUM WIRE TESTING REPORT | |||||
STANDARD | Q/320292AAAB01-2009 | Sample | ||||
Model | AWG26 0.405mm | Qty. | ||||
No. | TEST ITEM | Requirement | Testing result | |||
1 | Dimension | / | / | |||
Conductor Dimension | 0.405±0.005 mm | 0.405 | ||||
Paint flim thickness | ≥ 0.042 mm | 0.055 | ||||
Max.external dia. of wire | ≤ 0.468 mm | 0.460 | ||||
2 | Electric resistance | 0.2092~0.2242Ω/m | 0.2135 | |||
3 | Elongation | ≥ % | / | |||
4 | Resilience | ≤ / | / | |||
5 | Flexibitity,adhesive quality | / | / | |||
Winding test | 1 d winding without cracking | OK | ||||
Tensile testing | Stretching without cracking | |||||
Sudden apart testing | No cracking | OK | ||||
Peeling testing | ||||||
6 | Thermal shock | 3d winding without cracking | OK | |||
7 | Cut-through temperature | 2min 320 °C | OK | |||
8 | Scraper painting | Av.3.4, Min.2.85 N | 5.48/5.32 | |||
9 | Solvent resistance | ≥ 1 H | OK | |||
10 | Breakdown voltage | / | / | |||
Room temperature breakdown | ≥ 4.4 kv | 7.2/7.0/7.4/7.4/7.6 | ||||
High temperature breakdown | / | / | ||||
11 | Paint film continuity | / | / | |||
12 | Appearance | Smooth, uniform | Smooth, uniform | |||
13 | Result | OK |
If required size out of above scpoe, please contact with us.
Factory view:
awg26 aluminium enameled winding wire for fans & motors