Detailed Product Description
Ethernet over coax,ethernet modem,EOC
DT Series products are front-end equipment based on home-plug technology and can provide the users with high speed of network access services.
DT8111 is a single output front-end equipment which can support 64 users and can provide symmetric UL/DL of up to 50Mbps when used with DT9111, our terminal modem.
Technical Parameters
Item | DT8101 | ||
Frequency Range | 2~65 MHZ | Transmit Power Level | 120 dBuV |
Clock Frequency | 200 MHZ | Attenuation | ≥60 dB |
Modulation Rate | 224 Mbps | FLASH | 8 MB |
Throughput | 50 Mbps | SDRAM | 32 MB |
Power Consumption | < 8 W | Work Temp. | 0~ 40 |
Power Supply | 5 VDC | Modulation | OFDM 256QAM QPSK |
Standard | IEEE802.3IEEE802.1QHome Plug AV/BPL | ||
Management Function | HTTP Build-in WEB page. | ||
VLAN 802.1Q VLAN. | |||
TELNET Support | |||
FTP Support FTP Transmission | |||
DHCP Support SAC and DAC | |||
MAC Binding MAC Add. And IP Add. Binding | |||
QOS Support 3 Priorities Configuration and Rate Control | |||
SNMP Support Common/Private MIB v1/v2/v3. | |||
Fiber Module Description
Item | HYC-A-DBS02S | ||
Wavelength | 1310nm | Transmission Distance | 20km |
Interface | SC | Transmission | Full/Half Duplex |
Dimension | 76mm×50mm | Working Humidity | 10%-90%RH |
Power Consumption | < 2 W | Working Temp. | 0~ 40 |
Power Supply | 5 VDC | Storage Temp. | -20-70 |
State Indicator | Link/Act the Indicator,Transmission Rate10M100MbpsFull/Half Duplex and Conflict. | ||
Fiber | Single- mode Fiber 9/125um | ||
Standard | IEEE802.3u 100Base-FXFiber Optic Ethernet Standard | ||
Other Features | Support Half & Full Duplex Far End Fault Inspection Conform with IEEEE802.1D Spanning Tree Standard | ||
