1.Single speed,double speedd,strong structure 2.Using for gantry crane , overhead crane or H-beam 3.Best service and warranty
Work Well Electric Wire Rope Hoist For Gantry Crane,Overhead crane Introduction:
CD1 type wirerope electric hoist as lifting machnine is a kind of light-duty lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety limiter in both up and down directions.
CD1 type wirerope electric hoist as lifting machnine can be widely used to electric hoist heavy objects, or installed on the straight or curve I-section steel beam of single beam cranes. They can also be used together with Electric Hoist Double beam gantry cranes and jib cranes. All the above has made the electric hoist common in industrial and ore enterprises, railway, wharfs and warehoues.
Features:
Motor: electric hoist as lifting machnine Motor is a squirrel cage taper type rotor motor with braking, it is made by Nanjing special motor factory, it is the best quality motor, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Wire Rope: electric hoist ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope, is six.
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Electric apparatus controlling system: Model CD1 and MD1 electric hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Technical Parameter:
1 | Model | CD and MD |
2 | Rated load capacity (T) | 0.5, 1, 2,3, 5, 10,16, 20 ton |
3 | Rated span (m) | 7.5-31.5 |
4 | lifting height (m) | 6, 9, 12, 18, 24, 30 |
5 | Work dury | A3 andA4 |
6 | Control way | Pendent line control or remote control or both |
7 | Motor | Squirrelcage rotor motor Nanjing Special brand(No.1 in China) |
8 | Power supply | 380V 50hz 3phs (or according to your demand) |
9 | Main hook lifting speed (m/min) | 8/0.8m/min, 7/0.7m/min, 3.5/0.35m/min |
10 | Trolley travelling speed (m/min) | 20/30m/min |
11 | I beam model | 16-63c |
12 | Min. rotate radius | 0.8m-9m |
The techinacl parameter is for your reference ,if you want to order the hoist , pls tell the following data:
1. the capacity
2. the lifting height
4. the industrial voltage in your country
5. the other special demand
We sincerely invite you visit our factory!
Electric wire rope hoist picture with different color:
GOST CERTIFICATE:
Foreign Clients for wire rope hoist:
Spare parts for wirerope electric hoist:
Work Well Electric Wire Rope Hoist For Gantry Crane,Overhead crane
