1. Use for transfer and keep energy 2. Save energy 3. Sensible heat 4. Hydrophilic aluminium foil 5. Make any size
The cross flow industrial radiator is made of antiseptic hydrophilic/Epoxy coating aluminium foil, which use for HRV
system, in order to recover heat energy.Have no secondary sollution, thermal conductivity fast, and high heat
transfer rate features.
Aluminium foil Five layer curring 45°angle 90°angle
Working principle
The industrial radiator is the major part of heat recovery ventilator. Because the different temperature between the
fresh air and exhaust air, the air is forced to crossover through the industrial radiator the heat would transfer from the
hotter side to the colder side, so as to recover the energy from exhaust air.Two airstream never come into direct
contact, make sure no cross contamination.
Cross flow
Feature
1. Adopt antiseptic hydrophilic aluminium foil, resistant to corrosion, with long service life.
2. Module structure, no use of rivets or screws.
3. No running components, low maintenance cost.
4. Suitable for washing with water or neutral detergent.
5. Extremly high strength and pressure related stability.
6. Compact structure, small volume, suitable for various occasions.
Model Range
Dimension (mm) | Plate distance (mm) | ||
A1=A2 | B | C90/C45 | |
On request ≤1000 | On request ≤1000 | On request (45°/90°) | 2.0-14.0 |
Remark:
1. As soon as possible to use face velocity (1-m/s ~ 2.5 m/s) aluminum radiator, ensure the economic running.
2. Any size of aluminum radiator can be made base on customers′ requirements.
Applied range
The industrial radiator is the major part of heat recovery ventilator(HRV), for air volumes up to 100,000 m3/h,
include the household and commercial ventilations. The steel panel radiator recover the heat energy in
winter and cold energy in summer, not only save the energy but also improve the indoor air quality.
Welccome to inquire our products.
cross flow industrial radiator for vent
