tube type laboratory furnace 1. Double-layer structure with built-in wind cooling system. 2. Heating element:resistance wire.
HTL 1100°C Tube Type Laboratory Furnace
Application
Tube furnace can be drawn into the vacuum state according to your requirements. It is ideally just for university, scientific research institutes and enterprises to do high temperature atmosphere sintering, reducing atmosphere, CVD test, PECVD experiment and the use of vacuum annealing.
Features
1. Double-layer structure with built-in wind cooling system.
2. Temperature control: Japanese Shimaden 30 steps PID programmable thermal controlling system.
3. Heating element: resistance wire.
4. SCR controls.
5. Phase-shift trigger.
6. Refractolry: Japanese Alcera polycrystal alumina fiber.
7. Quick rise of temperature.
8. 99 alumina tube used as its tube, the ends of the tube are sealed with stainless steel flanges.
9. The temperature uniformity in furnace cavity, the lower surface temperature.
10. Saving energy
Owning single temperature zone, double zones or three zone.
Safety features
1. Overheat Protection
2. Overtemperature Protection
3. Overcurrent Protection
4. Overvoltage Protection
5. Power Failure Protection
6. Thermocouple Broken or Malfunctioned Protection
7. Fuse Protection
Optional accessories
computer control, RS485 or RS232 interface, atmosphere control (floating flowmeter, mass flowmeter); air feed ( mixing gas ) system, movable furnace brace, and vacuum system (rotary vacuum pump, molecular pump and vacuum tester).
Main technical parameters
Model | Chamber size (DxWxH) (mm) | Power (kw) | Max. Temp. (°C) | Rated Temp. (°C) | Heating element | Voltage(v) | Heating rate(°C/min) |
HTL1100-60 | Φ60x1000 | 4 | 1100 | 1000 | Resistance wire | 220 | ≤10 |
Note: temperature zone of furnace can be customized at your request.
\
HTL1100-60 vacuum Tube Furnace
