Reinforcing welded Mesh 1.Wire Diameter:2.5mm-12mm 2.Open size:25.4mm-300m 3.Panel size:6(L)maxX1-2.5m(W) 4.Use:construction

Reinforcing welded Mesh

Manufactured in strict accordance to SANS 1024:1991 standards

 1.Wire Diameter:2.5mm-12mm2.Open size:25.4mm-300m3.Panel size:6(L)maxX1-2.5m(W)4.Use:building surface, wall, ground, bridge, bank and airport.  

      

Welded Mesh mats can be detailed as either flat or bent sheets, depending on the job requirements Welded Mesh reinforcement mats are the most commonly used form of prefabricated reinforcement and is particularly suitable for flat slab construction. Other designed applications would be for pile caps, retaining walls, shear walls as well as beams and columns Welded Mesh reinforcement reduces construction time considerably SABS designated fabric mats are standard welded reinforcement mats and can be scheduled simply by reference to the fabric type, sheet dimensions and bending shape code. (The reference is the nominal mass of the fabric in Kg/m2 x 100) The wire used in WM reinforcement fabric has a characteristic strength (0.2% proof stress) of 485 MPa compared to 450 MPa for high tensile rebar. Fabric may be used at higher stresses than high tensile rebar resulting in a material saving of approximately 8%. Welded Mesh mats can be detailed as either flat or bent sheets, depending on the job requirements Welded Mesh reinforcement mats are the most commonly used form of prefabricated reinforcement and is particularly suitable for flat slab construction. Other designed applications would be for pile caps, retaining walls, shear walls as well as beams and columns Welded Mesh reinforcement reduces construction time considerably SABS designated fabric mats are standard welded reinforcement mats and can be scheduled simply by reference to the fabric type, sheet dimensions and bending shape code. (The reference is the nominal mass of the fabric in Kg/m2 x 100) The wire used in WM reinforcement fabric has a characteristic strength (0.2% proof stress) of 485 MPa compared to 450 MPa for high tensile rebar. Fabric may be used at higher stresses than high tensile rebar resulting in a material saving of approximately 8%.

         

Welded mesh fabric reinforcement standard fabrics Structural fabric reinforcement design dataCross sectional areas at various spacing mm2/m, mass at various spacing kg/m2 DIAmm Areamm2 Masskg/m Wire Spacing mm5075100125150175200225250275300DIA 12 113.11   2262 1508 1131 905 754 646 566 503 452 411 377 12   0.888 17.76 11.84 8.88 7.1 5.92 5.07 4.44 3.95 3.55 3.23 2.96 11 95.05   1901 1267 950 760 634 583 475 422 380 346 317 11   0.746 14.92 9.95 7.46 5.97 4.97 4.26 3.73 3.32 2.98 2.71 2.49 10 78.55   1571 1047 786 628 524 449 393 349 314 286 262 10   0.617 12.34 8.23 6.17 4.94 4.11 3.53 3.09 2.74 2.47 2.24 2.06 9 63.63   1273 848 636 509 424 364 318 283 255 231 212 9   0.500 9.99 6.67 4.99 3.99 3.33 2.86 2.5 2.22 2.00 1.82 1.67 8 50.27   1005 670 503 402 335 287 251 223 201 183 168 8   0.395 7.9 5.27 3.95 3.16 2.63 2.26 1.98 1.76 1.58 1.44 1.32 7.1 39.6   792 528 396 317 264 226 198 176 158 144 132 7.1   0.311 6.22 4.15 3.11 2.49 2.07 1.78 1.56 1.38 1.24 1.13 1.04 6.3 31.18   624 416 312 249 208 178 156 139 125 113 104 6.3   0.245 4.9 3.27 2.45 1.96 1.63 1.40 1.23 1.09 0.98 0.89 0.82 5.6 24.63   493 328 246 197 164 141 123 109 99 90 82 5.6   0.193 3.86 2.57 1.93 1.54 1.29 1.11 0.97 0.86 0.78 0.71 0.64 4 12.57   251 168 126 101 84 72 63 56 50 46 42 4   0.099 1.98 1.33 1 0.8 0.67 0.57 0.5 0.44 0.4 0.36 0.33

Reinforcing welded Mesh