Laser model: Q-switched Nd:YAG Laser Laser wavelength:1064/532 nm Pulse energy:1000mj Pulse width:8ns
Q SWITCHED Nd:YAG LASER FOR TATTOO REMOVAL
Important Information
A. Installation and UsageI. Machine structure
The Nd:YAG Laser Tattoo Removal System is made up of light route system, power supply system,
computer controlling system, cooling system, etc. The light route system is installed into the hand piece,
but power supply, controlling and cooling system are installed into the machine box of power supply.
Main technical parameters:
Laser model: Q-switched Nd:YAG Laser
Laser wavelength:1064/532 nm
Pulse energy:1000mj
Pulse width:8ns
Repetition frequency:1, 2, 3,4,5,6 Hz
Cooling method:inner circulation water cooling
Power supply:AC110V± 10%, 50~60Hz; 230V±10%, 50~60Hz
Main physical parameters:
Dimensions:370×275×245mm3
Total weight:18kg
Each part’s name and function:
1. Emergency switch:When accident happened suddenly, press the red knob swiftly, then the machine is out of power. Turn the button in the arrow direction to spring it up and power resumes again.
2. Key switch:This is the main power supply switch. The screen displays a long horizontal line. Press the
"down” button to shut down the signaling voice.
3. Simm (simmer):Pressing the knob makes system enter into the standby state.
4. Freq (frequency adjusting ) key:Set repeated frequency 1~6Hz.
5. Power (power adjusting) key:This is the keys that can adjust energy higher and lower. During operation, every time when “+” is pressed, its energy will increase by 20mj. Every time when “-” is pressed, its energy will decrease by 20mj.
II.Working condition
Normal working condition:
1. Temperature:5°C-30°C
2. Relative humidity:≤70%
3. Pressure:860-1060hPa
4. Power supply:AC110V± 10%, 50~60Hz; 230V±10%, 50~60Hz
Working mode:interval and continuous working mode. Best to pause for 5 minutes after each continuous outputting of 5000 pulses.
Cooling:Circulatory water cooling with distilled water
III.Power supply
power supply:AC AC110V± 10%, 50~60Hz; 230V±10%, 50~60Hz
Connection:
1. Safety fuse socket: The safety fuse is installed into the power supply socket, using safety fuse(6A/ ¢5 ×20) which is used for over loading protection.
2. Power input socket: The machine should be connected to a power supply using a power cord.
IV.Installation
a) The Nd:Yag Laser System should be installed into operating room or therapy room fulfilling the
following requirements:
Temperature: 5°C-30°C,
Humidity: ≤70%
b) Power supply is installed per the above requirements. Please have qualified electrician to perform
checking and installation.
c) Installing navigated spin plugs:Plug navigated spin plugs into the INTERLOCK at the back of machine
trunk. Machine will stop outputting laser after pulling out the INTERLOCK.
d) Installing pedal foot switch: Plug the pedal foot switch into the F00TS at the back of machine and then screw it on tightly.
e) Screwing off the stopper on the water tank, then screwing it on tightly after adding distilled water fully.
Fast Delivery
After Sale Service
1) Main part has one year warranty.
2) Within three months, free to change the spare parts if come up quality problem.
3) User manual.
4) Lifetime technology supports.
Welcome OEM/ODM business!
We supply your own special design machine to help you win market!
2012 Desktop Nd:Yag Laser tattoo removal
