Milling Machine Tool table size:1245x223mm travel:735x345x380mm ram travel:356mm weight:1100kg
welcome to visit our website,the specification data of Milling Machine Tool (SWX-223) is as followed,if you need other information of our machine,please contact me freely or visit our factory by feild trip.
SWX-223 Features:
1.X axis and Y axis adopt the square lead rail.And the rigidity is good.
2.The wear resistence of X axis and Y axis is excellent by heating tratement of high-frequency.That may increase the life span.
3.It adopts the high faction cast iron.So it doesn't distort after two processing.
4.Adopting meehanite casting, precision bored and honed milling head,precision hardened and ground ways and table.
Specifications:
Model | Unit | SWX-223 |
Spindle taper | R8/ISO30/ISO40 | |
Spindle speeds | 80-5440(16 steps) 60-4200(variable) | |
Quill diameter | mm | Ø 86 |
Quill travels | mm | 127 |
Quill feeds | mm | 0.04/0.08/0.15 |
Head tilt | degree | ±45°F/B,±90°L/R |
Spindle motor | HP | 3HP |
Table size | mm | 1245×223(9"×49") |
Longitudinaltravel(X) | mm | 735 |
Cross travel(Y) | mm | 345 |
Vertical travel(Z) | mm | 380 |
T-slot | mm | 16×3×64 |
Ram travel | mm | 356 |
Weight | kg | 1100 |
Accessories:
Model | Standard Accessories | Special Accessories |
SWX-223 | Hand oil lubricator | Clamping board |
Pull rod | 6 machine vice (angle lock or hydraulic) | |
Toolbox with tools | Automatic feed equipment of table(L/R or F/B) | |
Wayover forward and back | Collets of R8 (7PCS) | |
Operatation Manual | Tool holder and collets of NT30 (7PCS) | |
Electrical box | Tool holder and collets of NT40 (7PCS) | |
Worklamp | Colling system and waterpond | |
Optical scale | ||
Horizontal milling device |
Milling Machine Tool (SWX-223)
