1.compliant with IEEE802.3 Ethernet . 2.Support auto-negotitation functions 3.SFP media converter 4,media converter 1000M Dual Fiber SFP fiber Media Converter1. Description:
IEEE802.3z/ab 1000Mbps Gigabit Ethernet supports two Types media for network connection such as 10/100/1000Base and 1000Base-SX/LX. The bridge media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. With internal power unit and cooling fan, it provides good stability and reliability.
1. Specifications:The Converter conforms to the following standards:
Standards: IEEE802.3u 10/100/1000Base-TX and 1000Base-FX
Connectors ( RJ45-UTP/STP and Fiber SC )
Data Transfer Mode: 1000Mbps
Power Requirement: & AC 220V
Operation Temperature: -10°C to 55°C
Storage Temperature: -40°C to 70°C
Humidity: 10% to 90% no condensing
UTP Cable: Cat.5 cable up to 100m
Fiber Cable: 50/125,62.5/125 or 100/140um multi-mode
8.3/125,8.7/125,9/125 or 10/125um single-mode
Model DescriptionThe 1000Mbps fiber Transceivers: | |
Type | Description |
XTR1000B-S85 | 10M/100M/1000M TX, 850nm, 550m, AC Supply Power, dual fiber |
XTR1000B-L13-1 | 10M/100M/1000M TX, 1310nm, 20km, AC Supply Power, dual fiber |
XTR1000B-L13-2 | 10M/100M/1000M TX, 1310nm, 40km, AC Supply Power, dual fiber |
XTR1000B-L13-3 | 10M/100M/1000M TX, 1310nm, 60km, AC Supply Power, dual fiber |
XTR1000B-L15-1 | 10M/100M/1000M TX, 1550nm, 60km, AC Supply Power, dual fiber |
XTR1000B-L15-2 | 10M/100M/1000M TX, 1550nm, 80km, AC Supply Power, dual fiber |
XTR1000-S85 | 10M/100M/1000M TX, 850nm, 550m, DC Supply Power, dual fiber |
XTR1000-L13-1 | 10M/100M/1000M TX, 1310nm, 20km, DC Supply Power, dual fiber |
XTR1000-L13-2 | 10M/100M/1000M TX, 1310nm, 40km, DC Supply Power, dual fiber |
XTR1000-L13-3 | 10M/100M/1000M TX, 1310nm, 60km, DC Supply Power, dual fiber |
XTR1000-L15-1 | 10M/100M/1000M TX 1550nm, 60km, DC Supply Power, dual fiber |
XTR1000-L15-2 | 10M/100M/1000M TX, 1310nm, 80km, DC Supply Power, dual fiber |
XTR1000B-LD-1 | 10M/100M/1000M TX, 1310nm, 10km, AC Supply Power, single fiber and Bi direction |
XTR1000B-LD-2 | 10M/100M/1000M, 1310nm, 20km, AC Supply Power, single fiber and Bi direction |
XTR1000-LD-1 | 10M/100M/1000M, 1310nm, 10km, DC Supply Power, single fiber and Bi direction |
XTR1000-LD-2 | 10M/100M/1000M, 1310nm, 20km, DC Supply Power, single fiber and Bi direction |
LED Description:
LED | COLOR | FUNCTION |
FX | Green | Lit when 1000Base-X connection is good |
TX | Green | Lit when TP connection is 1000Mbps; Off when TP connection is 10 or 100Mbps |
R | Green | Lit when the port is receiving data |
T | Green | Lit when the port is transmitting data |
FDX | Green | Lit when TP full-duplex mode is active; Off when TP half-duplex mode is active; Blinks when collision signal is present |
PWR | Green | Lit when power is coming up |
=>Wear a grounding device for electrostatic discharge
=>Install the media cable for network connection
=>Verify that the voltage of AC power is correct and plug in AC power cord
Fiber Port | Attach the fiber cable. The Tx, Rx fiber cable Must be paired at both ends |
TP Port | Attach TP Cat. 5 cable to TP port. The 10/100/1000 TP port is auto-linking the Tx/Rx wires (e.g.either MDI-X or MDI-II). It will auto-cross-connect the transmit/receive wires to a switch or to a workstation, be sure of the proper wiring and the Link LED status. |
1000M Dual Fiber SFP fiber Media Converter
