1. Standard or customized 2. K10-30, P10-30 Any grade with different size are available 3. High precision 4. Superior quality
Hardness:HRA92.8 Density:14.5~14.8g/cm3 T.R.S:3200N/M2 Coating:DLC coating Workpiece:Reflectal&Birmasil
We specialize in the manufacture of tungsten carbide products such as tungsten carbide strips, rods,rings,inserts, shims, wear parts, drawing dies,drilling bits,cold forging dies,bars, balls,burrs ,PCD blades,PCBN blades,ceramic inserts, and customized products etc.In the meantime ,please be informrd any grade and performance are available as per customers requirements and our annual output is around 500 tons .
The carbide powders are WC, TiC, Cr3C2, VC, TaC, NbC, BC4, etc
Number and performance of cutting blade series
Grade | ISO Code | Density g/cm3 | Hardness HRA | TRS N/mm2 | Performance & application recommended |
SK6 | K10 | 14.7-15.1 | 90-90.5 | 1850-2000 | With better wear resistance than SK8 alloy, used for semi-finishing and finishing cast iron, non-ferrous metal and its alloy, and cutting machining non-metallic materials. |
SK6A | K10 | 14.7-15.1 | 91.5-92 | 1750-1850 | Fine grain alloy, with high wear resistance, used for semi-finishing hard cast iron, non-ferrous metal and its alloy, semi-finishing and finishing high manganese steel, etc. |
SK6X | K10 | 14.7-15.1 | 91.5-92 | 1800-1950 | Fine grain alloy, used for machining chilled cast iron and heat resistant steel, also used for finishing plain cast iron. |
SK8 | K20 | 14.5-14.9 | 89-89.5 | 2000-2300 | With high strength of use, used for rough machining cast iron, non-ferrous metal, non-metallic materials, uneven surface and discontinuous cutting. |
YS2T | K20-M30 | 14.4-14.6 | 91.5-92 | 2200-2400 | Fine grain alloy, used for processing heat-resistant alloy, high manganese steel materials, etc. |
ST5 | P30 | 12.5-13 | 90-90.5 | 1800-2200 | Used for rough machining carbon steel and alloy steel. |
ST14 | P20 | 11.2-12 | 90.5-91 | 1400-1600 | Used for rough machining and semi-finishing carbon steel and alloy steel. |
ST15 | P10 | 11-11.5 | 91-91.5 | 1400-1600 | Used for semi-finishing and finishing of continuous cutting carbon steel and alloy steel. |
SW1 | M10 | 12.6-13.5 | 91.5-92 | 1400-1600 | Used for processing difficult-to-machine steels, such as cast iron, plain steel and heat resistant steel, stainless steel and so on. |
SW2 | M20 | 12.4-13.5 | 90.5-91 | 1600-1800 | Used for processing special difficult-to-machine steels, also used for processing plain steel and cast iron. |
Other grade of cutting blade may be offered according to customers' requirement.
Cutting tool indexable tungsten carbide insert
