CNC Router Controller; CNC Interface Board (Breakout Board); Work with MACH3 KCAM4.
CNC Router Controller MACH-CNC Interface Board (Breakout Board) For PC MACH3 KCAM4
Features:
1. provide the 12-ways OC output , the output port can drive the SSR ( solide-state realy ) directly
2. 12-ways optical isolated common signal input
3. all the input and output have the signal instructions
4. single power supply 13-24VDC(other voltage need order)
5. all the output signals of the PC parallel port are face lifting by the Schmitt Trigger and increase the anti-jamming capacity of the digital signal transmission
6. Using Mach 2, 3 as the controlling software, makes the application of the PC as the industrial control possible
7. as the lack of the IO of the PC parallel port, we add 3 axis 6bit independent Limit switch of the IO input
8. compatible with all the pulse and direction signal of the Stepper or Servo driver , can control the lathe and milling machine to work
9. the input end can connect to the mechanical switch , groove optocoupler, proximity switch , tool presetter etc
10. the breakout board P1-P17 port signal correspond to the pin1-17 of the PC parallel port , the parallel port pin 18-25 is the GND.
11. To control the 2-ways electromagnetic relay output by the parallel P1 and P16 , this can control the cooling pump and lubricating oil pumpof the lathe
12. the setup of the P17 in the Mach 3 for the charge pump can control the solide state relay output to increase the safety of the lathe
13. the P14 can provide the accurate 0-10V analog voltage for the main axis speed control signal , this can stable the frenquency of the speed of the spindle
14. the dimension: 170mm*115mm, locating hole: 119mm*101mm
For more information, please contact Derek.
CNC Controller Interface Board (Breakout Board) For PC MACH3 KCAM4
