This line is very suitable for the production of refrigerator industry
1 conveyor Aluminum frame structure, legs of H550mm;´steel structure, frame dimensions of about: L W910mm Transportation panel is steel molding, panel external dimensions: 800mmx96mmx25mm 2, No power roller line Aluminum frame, steel legs, feet 60mm cold drawn seamlessE 2mm diameter /distance 1.5 m; drum wall thickness steel pipe production, roller spacing 80mm, the surface of galvanized roller; H500mm;´ W942mm ´line of body size: Lmm 3, power roller line Power roller diameter φ60mm wall 2mm, roller pitch 100mm, galvanized/cold drawn seamless steel tube production roller surface; Driver built-in, motor reducer with cycloid, smooth drive noise underground; line of velocity: 6m/min, line W942mm;´body size: L 4,90 ° bending plate chain line Side of the plane aluminum frame and legs are used, the remaining steel structure; panel fanned, with δ = 2.5mm cold plate bending, both ends of the seal, the center width of about 50 to 55mm, chrome plated, the Yuheng Liang, small parts such as zinc plated; height of 550 ± 30mm; outside width of 900mm, end and side panels and side panels and side frame gap spacing less than 5.5mm, the side panel box must be higher than 8mm, energy per square meter bear the weight 50Kg; center radius R = 2000mm, speed V = 1 ~ 3m/min, both ends of the tube with a diameter Φ = 32mm zinc plated without power roller; with double chain (P = 50.8, P = 63.5), and refueling equipment on a regular basis; 5, Li L-shaped box machine rotary mechanism, with the refrigerator stickers soft rubber contact surface to prevent scratching the refrigerator; cylinder drive arm rotation, a smooth rotation; assembly stand in front of the refrigerator box machine can be manually placed immediately after the end of care cases; Li box machine manual button (or foot switch) control. 6, lifting machine translation and power roller conveyors into one structure, aluminum alloy frame for the line between the tank body 90 ° directional transmission; with pneumatic lifting structure, cylinder, solenoid valve high-quality products made in China, the two row of new tanks chain transfer box, lifting smooth and safe transport, no drop box phenomenon. 7, vacuum line with conveyor structure, elevation of 2.5m, 2m cable set every body a column, the entire line requested reasonable structure, beautiful appearance, flexible operation, low noise, easy installation and maintenance. Line body weeks about 40m, turning radius of about 600mm, trolley line and suspension line spacing of about , station° = 180 a200mm, made of turning part of the overall structure of spacing of about 800mm; 8, lifting 180 ° (90 °) rotation translation machine aluminum frame structure, steel frame, pneumatic lifting, air shift, the whole beautiful shape, reliable performance, with organic drum line together; 9, pneumatic system 9.1 gas line, pipeline set reasonable and meet production requirements; 9.2 cylinder and other components reliable, piping and fittings shall not have leakage phenomenon; 9.3 cylinder and other components of domestic high-quality brand-name selection. 10, electrical control system Electronic control system for automated control of OMRON PLC. It has the quality and reliability, flexible configuration, real time and convenient maintenance. Production lines at both ends of the control signal more concentrated, with the master control station structure can reduce the amount of wiring and fault point, so maintenance is more efficient and convenient.
Refrigerator Pre-Assembly & Final Assembly Line
