1.Output Flow:0-3(L/Min) 2.Output Pressure:0-0.4(MPa) 3.Power Consumption:max 160W 4.Power Voltage;220V +/-10%
Features and Advantages1.Improve analysis accuracy, lower cleaning requirement on detector.2.Match with GC and analytical column.3.Gas Purity: the amount of hydrocarbon is less than 0.5ppm (such as methane).4.Low noise, without blockage.5.Regular output flow and pressure.6.QL-10 adopts oilless compressor. It's durable in use and produces high-purity air.
Product Introduction |
It's powered by whole sealing silent air compressor. After purification, water, oil, dust and impurities are removed. Through pressure stable system, pure and silent air is finally produced under stable pressure. |
| |
1.Gas for flame ionization detector(FID), flame photometry detector(FPD), nitrogen phosphorous detector (NPD).2.Gas for hydrocarbon analyzer.3.Atomizing gas and vent gas for Liquid chromatography and Mass Spectrometer.4.Atomic adsorption and ELSD(Evaporative Light Scattering Detector). |
Technical parameters
Model | QL-3 | QL-5 | QL-10 | QL-20 | QL-40 | QL-50 |
Output Flow(L/min) | 0-3 | 0-5 | 0-10 | 0-20 | 0-40 | 50-300 |
Output Pressure(MPa) | 0-0.4 | 0-0.7 | ||||
Power Consumption(W) | <160 | <180 | <200 | <350 | <380 | <1000 |
Power Voltage(V) | 220V±10% | |||||
Dimension(L×W×H)(mm) | 430×290×400 | 500×270×420 | 400×310×640 | 480×310×650 | ||
Weight(Kg) | <26 | <30 | <34 | <36 | <50 | |
Air Generator for GC
