pulley-type wire drawing machine model:350/400/450/600 inlet dia :2.5-6.5 outlet dia:0.4-1.2
1 pulley-type wire drawing machine
Model No.of drafts Max.inlet wire(mm) Min.production(mm) Motor power(kw) Production speed
350 6-12 2.5 0.4 3-7.5 15m/s
400 6-12 3.8 0.6 5.5-15 15m/s
450 7-12 4.5 0.8 7.5-18.5 12m/s
600 4-10 6.5 1.2 15-37 12m/s
Sr. | Name | Unit | Data |
1 | Drawing machine name |
| LZ6/700 LZ9/600 |
2 | Drawing machine and pull mode |
| Straight line tuning type |
3 | Draft number |
| 9 |
4 | Coil diameter | mm | φ700 φ600 |
5 | Speed adjustable mode |
| AC freq. Con. Speed Adjustable |
6 | Motor power | KW | 6×45 9×30 |
7 | Wire-in diameter | mm | maxφ8 Φ5.5 |
8 | End product diameter | mm | Φ4.5 min Φ2.0 |
9 | Average compression | % | ≤21% |
10 | Design drawing speed | m/s | max10(light load high speed, heavy load low speed) |
11 | Control mode |
| Fully digital |
12 | Logical control |
| PLC |
13 | Wire-in strength | MPa | ≤1250 |
14 | Carbon content in material |
| Carbon spring wire steel, high carbon steel |
15 | Drum cooling |
| Self contaminant release narrow seam type water cooling + outer ring type fan cooling. |
16 | Die box |
| Direct water cooling |
17 | Cooling water pressure |
| 0.2~0.3Mpa |
18 | Pneumatic system |
| Air pressure≥0.5Mpa |
19 | Stop time | S | Normal stop≤50s,EMG stop≤5s |
20 | Pay-off mode |
| In-line turning pay-off machine |
21 | Take-in mode |
| Trunk pay-off machine(with small compression rate drawing)or I-type take-in coil |
22 | Total length of production line | M | 30.8(as per in-line turning payoff machine) |
LW8/400 pulley-type wire drawing machine
