Introduction Based on industrial computer as the host of correlator, the multi-function correlator ADC-III has the function of intensity analysis and frequency spectrum analysis for leaking noise. And so provides more accurate reference for filter settings. Equipped with powerful correlation analysis software, ADC-III applies 3D correlation analysis, multi-correlation technology and automatic evaluates correlation reliability, it is able to pin-point leaks on metal and non-metal pipes fast, exactly and reliably. ADC-III is used for solving difficult leak detection problems and will help those water companies who has a lot of non-metal pipes. Features Industrial Computer is used as operation platform of calculation, Chinese menus, easy to use With the function of double correlation, time domain correlation analysis and frequency domain correlation analysis, you can detect leaks in very complicated environment. 3D correlation analysis, distinguish leak noise from interference noise source. Continuous measurement and 11 times correlation, make detection result more accurate. The sampling speed achieves 10 K/S (common speed adopted in other countries is 5 K/S), enhancing accuracy of leakage location. High-sensitivity acceleration sensor with amplifier is adaptable to all kinds of long-distance pipeline Automatic Digital filtering, can be optimized according to on-site signal. Automatic gain control is used for transmitter, providing it with a dynamic range of 50 dB - 100 dB that promote the signal detection to the optimum. Up to 500 mw transmitter power satisfies the over-long correlation distance and enhances the communication performance with the receiver Can be used for up to 10 sections mixed material pipes Correlation results can be stored at any time without limit Raw data can be stored as required, convenient for playback and post analysis Signal intensity and waveform can be observed in real time, meanwhile, leaking noise can be monitored in real time. Technical Data Receiver Battery Type: Rechargeable lithium battery Interfaces: USB Operation time: 15 h Charging time: 8 h Operation Temperature: -20°C - +55°C Environmental: IP56 Transmitter Display: LCD, 128 X 64 dot matrix Transmitter Power: 500 mW Battery Type: Rechargeable lithium battery Operation time: 12 h Charging time: 10 h Operation Temperature: -20°C - +55°C Environmental: IP56 Sensor Sensor Type: High-sensitivity piezoelectric ceramics acceleration sensor with built-in amplifier Connection lead: Military specification highly strength flexible cable Sensitivity:>10 v/g Installation method: Magnet Environmental: IP68 Operation Temperature: -20°C - +80°C (150°C high temperature resistant sensor is optional)
