1. Pro/ENGINEER solidworks (3D Modeling) services, 2. AutoCAD (2D Modeling) services, 3.Injection housing mould Making service
we make injection housing mould
Sanli plastic product works with the following:
Drawing exchange file and plastic material:.
2D: | .dwg .dxf .pdf(soft is:AutoCAD PDF etc) |
3D: | .igs .step .x_t .prt .sldprt.easm(soft is :SolidWorks, Pro/ENGINEER etc) |
plastic material:
ABS (Acrylonitrile Butadiene Styrene) | PA (Polyamide) | PA6 (Polyamide 6) | PA66 (Polyamide 66) |
PET (Polyethylene Terephthalate) | PC (Polycarbonate) | POM (Acetal) | PP (PolyPropylene) |
PVC (Polyvinyl Chloride) | TPR (Thermoplastic Rubber) | HDPE | LDPE |
Plastic mold base:LKM,Hasco
Hotrunner:YUDO, Hasco
Plastic mold steel:
AISI | DIN | STEEL NAME | HARDNESS | HEATBTREATMENT | USE |
1040 | 1.1730 | ASSAB760 | 13-18HRC | / | plastic mold base,ejector plate,support pillar,stop pin etc. |
1045 | K-100 | ||||
1050 | DAIDO P1 | ||||
P20 | 1.2738 | ASSAB 718 | 28-32 HRC | / | plastic mold cavity and core insert |
1.2311 | THYSSEN 2311 | ||||
P20H | 1.2711 | ASSAB 718 H | 35-38 HRC | / | plastic mold cavity and core block |
THYSSEN 711 | |||||
H13 | 1.2344 | ASSAB 8407 | 190 HB (12 HRC) | 48-52 HRC | plastic mold cavity and core block ,sprue,slide,ejector pin etc. |
THYSSEN 2344ESR | |||||
420 | 1.2083 | STAVAX S-136 | 180-220 HB (10-18 HRC) | Mirrior polishing,HRC 52-54 | Mirrior polishing steel or PVC plastic |
THYSSEN 2083 ESR | PVC plastic,HRC 46-48 | ||||
420H | 1.2316 | S-136H | 32-34 HRC | / | PVC,acidic plastic etc. |
THYSSEN 2316ESR | |||||
BeCu | / | mold max | 40-42 HRC | / | good for cooling |
;'
customer makes injection housing mould in sanli,we also make the following moulds
injection housing mould
