Obstruction light control box Aviation obstruction light controller Control box for aviation obstruction lighting cabinet
CTR04A control box for aviation obstruction light
Description
CTR04A Control Box employs MCU IC control technology. With a pre-programmed software, CTR04A can control up to 4 aviation obstruction lights. When any light fail, the control box will send a alarm signal to alarm device in BTS in order for maintaneance staff to replace the light immediately. if needed, it can turn on all light in the system and make them flash at the same time. (Control box that can control more than 4 lights are also available upon request).
A photocell is included with the control box, which can turn on/off the system at dawn/dusk. The photocell should be installed in open environment.
CTR04A added a extra surge protection than CTR04. The surge protector can risist up to 65KA, 2.2KV.
Functions Features
All lights on/off lights simultaneously
Light failure indication, there are corresponding indicator shows when any light failed
Alarm signal output, can connect to other external alarm devices
A manual photocell switch, which can switch to manual control mode during installationing
PJ003 automatic photocell
The controller is indoor type (out-door type available upon request ).
Description | Parameter |
Operation voltage | Input: 18-65VDC, 110-240VDC |
Output: 18-65VDC | |
Serge protection | 65KA/2.5KV |
Power frequency | 50-60HZ |
Power consumption | Support up to 300watts |
Photocell sensitivity | 30-70lux(optional) |
flashing | 20-60 times/min(optional) |
Ambient Temperature | -30-60C |
Size | 306*203*113mm |
Aviation obstruction light control box/controller/navigation light cabinet