AT-608T Foam slitter and Laminator 1.laminating, slitting and rewinding tapes 2.Max. width: 1650mm 3.Max. diameter:1000mm
Features:
1. Laminating 3 layers at one time. 2 layers from back, 1 layer from front. Also has one rewinder
for release paper, and all unwind base are independently on operation and auto tension control.
2. Unwind tension is controlled by powder brake. It's adjustable on the request of different material.
3. The distance and pressure of lamination are controllable as per different materials.
4. Slitting by shear cutter, which was designed for multi-purposed materials cutting.
5. 2 shafts center type winding to make tight and stable rewinding on finished rolls.
6. Rewind tension is controlled by powder clutch with auto tension controller. Recommended to
purchase auto knife angle adjustment if there will be lots of sizes on production.
Main techniacl parameters:
2.1 | MAXIMUM MACHINE WIDTH | 1700MM |
2.2 | MAXIMUM MATERIAL WIDTH | 1600MM |
2.3 | MAXIMUM MASTER ROLL OD | 1000MM |
2.4 | MATERIAL THICKNESS | 2-30MM |
2.5 | MAXIMUM OUTPUT SPEED | 30M/MIN. |
2.6 | MACHINE DIMENSIONS (LxWxH) | 3500x2500x1700MM |
System main operating features
4.1 | One unwinding unit with pneumatic shaft. |
4.2 | Mechanical wind up speed regulator complete with AC servo motor with push button and pedal. |
4.3 | Manual inflation and deflation of all pneumatic shafts. |
4.4 | Mechanical meter counter with wheel feeler. |
4.5 | Path rollers covered in silicone rubber. |
4.6 | Table with automatic web guide to keep the material straight. |
Welcome to visit Atape and feel free to contact us!
AT-608T Foam slitter and Laminator
