1.Resistant to water moisture 2. Demould easily 3.re-used above15 times 4. Good thermal insulation
12mm Black Film Faced Plywood
1,the weight is light: Is suitable for the high-rise construction and the bridge construction.
2,the width is big: The maximum width for 2440×1220mm, reduces the joint quantity, raises the mold working efficiency. 3, does not warp, does not distort, does not crack, the water resistant performance to be good, the turnover number of times is high, the service life is long. 4,the drawing of patterns is easy, is only the steel die 1/7. 5, makes the clear water concretes: Construction thing surface smooth artistic, subtracts the wall two plastering crafts, but the direct cover decoration, reduces time 30%.6, anti-corrosive: Does not pollute the concretes surface.7,the heat preservation performance is good, is advantageous to the winter construction. 8, may do changes the tune plane the template.
GIGA plywood is suitable for outside high-end and high-rise construction and bridge construction.It’s large breadth make it able to reduce the quantity of seam and improve the working efficiency of membrane. Good water resistance,strength properties, high turnover times, long service life, easy mold release by only taking the time 1/7 of the steel mould ,no secondary wall plastering process, being able to directly cover the surface decoration, shortening the process time by 30%. It’s advantageous to winter construction for the excellent heat preservation performance
we have four thickness 12mm 14mm 15mm 17mm
size: 1220*2440 915*1830 mm
core: poplar
glue: WBP and Melamine
Technical Specification: 18mm full poplar film faced plywood
No. | Property | Unit | Test Method | Value of Test | Result | |
1 | Moisture content | % | EN 322 | 6-12 | Check out | |
2 | Density | Kg/m3 | EN323 | 530 | Check out | |
3 | Bonding quality | Bonding quality | Mpa | EN314 | Max: 1.40 Min: 0.75 | Check out |
Damage rate | % | 54% | ||||
4 | Bending Modules of Elasticty | Longitudinal | Mpa | EN310 | 4180 | Check out |
Lateral | 4578 | |||||
5 | Bending Strength N/mm | Longitudinal | Mpa | 40.25 | Check out | |
Pckage
CONSERVE AND MAINTAIN:HOW TO CUT THE BEST FROM OUR FILM FACED PLYWOODSTORAGEAlways clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.SEALING OF EDGESPhenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.SEALING OF HOLESAny holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.CLEANING AND REPAIRTo obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete
No matter who you are, where you from, what yoou did, as long as you need compact laminate, or film faced plywood, welcome to contact us in any time.
12mm Black Film Faced Plywood
