1.cable joints/separable connector 2. 35KV/200A 3. EPDM 4. Loadbreak Elbow Connector 5. KEMA
Cable joints/cable acccessories/separable connector
The RU ZT-35/200 Loadbreak Elbow connector is a fully-shielded and insulated plug-in termination, rated 200 amps up to 35kV, connected with underground cable ranging from 25 to 120 mm2(conductor cross section). It's loadbreak probe with an ablative arc-follower tip provides dependable loadbreak switching characteristics.
The RU ZT-35/200 Loadbreak Elbows are molded using high quality peroxide-cured EPDM insulation. It is used to connect underground cable to transformers, switchgear and 200 amps junctions equipped with loadbreak bushings. The test point is available for use with hot line voltage indicators.
It is the essential component for high-voltage electrical connection of the pad-mounted transformers, submersible transformer and loadbreak junctions.
Electrical Characteristics:
Voltage Rating and Characteristics | |
Description | kv |
Standard Voltage Class | 35 |
Max Rating Phase to phase | 40.5 |
Max Phase to ground | 26 |
AC 50 Hz 1 minute Withstand | 104 |
DC 15 minute Withstand | 104 |
BIL and Full Wave Crest | 200 |
15kv Partial Discharge | ≤10PC |
Current Ratings and Characteristics | |
Description | Amperes |
Continuous | 200A |
Switching | 10 operations at 200A, 14.4kv |
Fault Closure | 10kA |
Short time | 10kA rms symmetrical for 0.2s 3.5kA rms symmetrical for 3.0s |
Electrical Characteristics are in accordance with or exceed GB/T 12706.4-2002, ANSI/IEE 386-1995, IEC 60502-4:1997 | |
separable connector /ZT-35kv/200A Load break Elbow Connector
