+Excellent dot reproduction +Wide latitude of development +Quick inking +Offset printing +Positive working
Positive Offset PS Plate for Offset Printing, Positive Printing Plate Technical Specification
| |
Plate type | Conventional positive plate. |
Substrate | Electro-chemically grained and anodized lithographic aluminum. |
Gauge | 0.15/ 0.25/ 0.30 (mm) |
Maximum width | 1320 mm |
Spectral sensitivity | 350-420 nm |
Safelight | UV filtered or Yellow |
Sensitivity | 130- 150mj/cm2 |
Color change | Blue Green to Green after exposed |
Developer | Huaguang PD developer (concentrated solution), 1 liter can process 15 sqm. Recommended dilution ratio:1:3( machine process), 1:4( manual process) |
Dot reproduction | 2%-98% in 200 lines/inch |
Packaging | 0.15mm 100 pieces/box 0.25/0.30mm 50pieces/box if length<1030mm; 30pieces/box if length≥1030mm; 25pieces/box if the area>1m2 |
Shelf life | 18 months when stored in a light-free area away from excessive cold, heat and high humidity |
Run length | Above100, 000 (Actual run length may vary according to press, ink and stock conditions.) |
Sizes can be produced by clients requested.
Good quality, stable performance. Used by Kodak brand coating.
* Photosensitive materials should be opened in lightless or weak yellow light conditions. Must to avoid insolation and to avoid getting wet .
Packing:
Transport:
Precautions:
For Offset Printing, Positive Printing Plate,Positive Offset PS Plate
