Welcome to ECBAY
1Rx8 256M x 64-Bit PC3-10600 1333Mhz CL9 204-Pin SODIMMDDR3 2GB Laptop RAM
1Rx8 256M x 64-Bit PC3-10600 1333Mhz CL9 204-Pin SODIMMDDR3 2GB Laptop RAM

1333Mhz DDR3 2gb laptop RAM 1.Full compatibility Intel 2.Original Chip MT hynix Nanya 3.RMA rate:less than 1%

1Rx8 256M x 64-Bit PC3-10600 1333Mhz CL9 204-Pin SODIMMDDR3 2GB Laptop RAM

DESCRIPTION

This document describes ValueRAM's 256M x 64-bit (2GB)

DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8

Memory module, based on eight 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency

DDR3-1333 timing of 9-9-9. This 204-pin SODIMM uses gold

contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

 •  JEDEC standard 1.5V (1.425V ~1.575V) Power Supply 

 •  VDDQ = 1.5V (1.425V ~ 1.575V)

 •  667MHz fCK for 1333Mb/sec/pin

 •  8 independent internal bank

 •  Programmable CAS Latency: 9, 8, 7, 6

 •  Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

 •  Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)

 •  8-bit pre-fetch

 •  Burst Length: 8 (Interleave without any limit, sequential with     starting address “000” only), 4 with tCCD = 4 which does not     allow seamless read or write [either on the fly using A12 or     MRS]

 •  Bi-directional Differential Data Strobe

 •  Internal(self) calibration : Internal self calibration through ZQ     pin (RZQ : 240 ohm ± 1%)

 •  On Die Termination using ODT pin

 •  Average Refresh Period 7.8us at lower than TCASE 85°C,     3.9us at 85°C < TCASE < 95°C

 •  Asynchronous Reset

 •  PCB: Height    1.18” (30mm), double sided component

1Rx8 256M x 64-Bit PC3-10600 1333Mhz CL9 204-Pin SODIMMDDR3 2GB Laptop RAM

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.