Desktop Memory 2G DDR3-1066 PC-8500 CL7 Model: KVR1066D3N7/2G
VR1066D3N7/2G(2GB 256M x 64-Bit PC3-8500 CL7 240-Pin DIMM)
DESCRIPTION:This document describes ValueRAM's 256M x 64-bit 2GB (2048MB) DDR3-1066 CL7 SDRAM
(Synchronous DRAM) memory module, based on sixteen 128M x 8-bit DDR3-1066 FBGA components.
The SPD is programmed to JEDEC standard latency 1066Mhz timing of 7-7-7 at 1.5V. This 240-
pin DIMM uses gold contact fingers and requires +1.5V.
The electrical and mechanical specifications are as follows:
FEATURES:JEDEC standard 1.5V ± 0.075V Power SupplyVDDQ = 1.5V ± 0.075V533MHz fCK for 1066Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 5,6,7,8,9,10Posted CASProgrammable Additive Latency: 0, CL - 2, or CL - 1 clockProgrammable CAS Write Latency(CWL) = 7(DDR3-1066)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address “000”
only), 4 with tCCD = 4which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinAverage Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°CAsynchronous Reset1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5PCB : Height 1.180” (30.00mm), double sided componentPERFORMANCE:CL(IDD) 7 cyclesRow Cycle Time (tRCmin) 50.63ns (min.)Refresh to Active/Refresh Command Time (tRFCmin) 110nsRow Active Time (tRASmin) 37.5ns (min.)Power TBD W (operating)UL Rating 94 V - 0Operating Temperature 0o C to 85o CStorage Temperature -55o C to +100o C
Desktop Memory 2G DDR3-1066 PC-8500 CL7 Model: KVR1066D3N7/2G
