1.Automatic temperature and time control system 2.High Mixing Performance 3.Hardnees quality 4.Easy installation
Open Rubber Mixing Mill 1. General advantage 1.1. Automatic temperature and time controlsystem 1.2. High Mixing Performance 1.3. High quality 1.4. Easy installation 2. Application: The mill is used for rubber plasticating, mixing, warming and sheeting. 3. General design: 3.1. The mill consists mainly for rolls, frame, bearing, roll nip adjusting, screw, heating and cooling device, emergency stop, lubrication system and such sections as electrical controls and, etc. 3.2. The main electric motor arrives the front and rear rolls to rotate oppositely through reducer, driving geras and friction gears. 4. Features: 4.1. The rolls are made of chilled cast iron. Their working surfaces are of high hardness and wear-resistant. The working temperature of the bored roll is controllable by steam, cooling water or oil that pass through them thus, to meet the requirements of milling process. 4.2. Roll nip adjustment is realized by hand or electricity which can obtain high accuracy and sensitivity
Parameters of rubber mixing mill
Model | XK-160C | XK-250C | XK-360C | XK-450C |
Diameter of back roller | 160mm | 250mm | 360mm | 450mm |
Length of roller face | 320 | 620 | 900 | 1200 |
Ratio of front and back roll | 1:2.1 | 1:1.1 | 1:1.25 | 1:1.27 |
Linearvelocity of front roll | 8-15.4m/min | ≤17.8m/min | 15.8m/min | 24.1m/min |
Linearvelocity of back roll | 6.7-12.8m/min | ≤19.6m/min | 19.8m/min | 30.8m/min |
One time feeding capacity | 1-2 kg | 10-15kg | 15-25kg | 30-50kg |
Driving power | 5.5KW | 18.5KW | 30KW | 55KW |
Machine weight | 1.2T | 3T | 6T | 10T |
Overall dimension | 1420*800*1500 | 2950*1070*1280 | 3300*1600*1550 | 5200*1760*1700 |
Open mixing mill XK-450C
