1.certificate:CE 2.can be designed as requirement 3.safe, energy saving, economical
Specification for Spray Booth YS-20
Inside dimension | 6900×3900×2650mm(L×W×H) |
Outside dimension | 7000×5350×3400mm(L×W×H) |
Main door | 2600 mm(W×H), made by bending steel without cover frame, , colour : blue. |
Escape door | 1 unit, 650×1800mm(W×H), colour: white. |
Basement | Galvanized steel assemble, 300mm high, quadrate steel support, 2000mm/pc. |
Wall Panels | Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with 50mm thick polystyrene (EPS) insulation inside, colour: white. |
Lighting system | Ceiling Lights: 8Units×3Pcs=24Pcs×36W, with electronic holders, lighting boxes are made by colour steel |
Generator setting | Intake air from back upper direction, exhaust air from back upper direction galvanized steel molding frame; white coated steel outside, galvanized steel inside, filled with heat preservation material in the middle. |
Intake and Exhaust air system | 2×3KW double-intake centrifugal fans for intake air, model YDW4.5M1, air capacity for each fan: 10500m3/h. |
Exhaust air system is optional. | |
Heating system | BT18 diesel burner, stainless steel heat exchanger, electric damper actuates from spraying to baking cycle. Max. heating productivity: 180000Kcal/h.. |
Filtering system | Pre-filter, ceiling filter, exhaust fibreglass filter |
Roof Plates | Galvanized steel plates |
Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meter. All motors are normal start. |
Technical Parameters of Spray Booth YS-20
Inside Dimension: (mm) | 6900×3900×2650mm L×W×H |
Outside Dimension: (mm) | 7000×5350×3400mm L×W×H |
Width of Entrance: (mm) | 3000 |
Height of Entrance: (mm) | 2600 |
Escape Door Dimension: (mm) | 650×1800W×H |
Intake Air Fan Capacity: (m3/h) | 21000 |
Exhaust Air Fan Capacity: (m3/h) | Optional |
Free Air Speed: (m/s) | ≥0.22 |
Frequency of Air Exchange: (time/h) | 294 |
Maximum Working Temperature: () | 80 |
Max. Heating Productivity: (kcal/h) | 180000 |
Illumination: (Lux) | >700 |
Air Filter Efficiency: | >95% |
Noise: db(A) | <85 |
Total Power: (KW) | 7 |
Specification for Prep Station YS-300-C
Outside Dimension | 7550×3550×3100mm(L×W×H) |
Inside Dimension | 6300×3450×2700mm(L×W×H) |
Plenum Dimension | 6300×3450×400mm(L×W×H) |
Basement | 300mm galvanized steel basement, full grilles made by flat bar and round steel then galvanized. 2 ramps, external setting, 2000×750mm(L×W), surface is painted. |
Room Body | Back side with 50mm EPS wall panels, the other 3 sides with PVC curtains; |
Lighting System | Ceiling lights 8units×4pcs=32pcs 36W, with electronic ballasts,5.0mm clear tempered glass; |
Generator Setting | Exhaust air from rear side; galvanized steel molding frame, white coated steel cover. |
Intake and Exhaust Air System | 5.5KW double intake centrifugal fan for intake air, 5.5KW double intake centrifugal fan for exhaust air, model YDW-4.5S, air capacity is 15500 m3/h, with manual damper for exhaust air. |
Heating System | RIELLO G10 oil burner, stainless steel heat exchanger. Max. heating productivity: 100000 Kcal/h. |
Filter System | Pre-filter, high efficiency filter, exhaust fiberglass filter. |
Roof Plates | Galvanized steel plates |
Control System | Fan operation switch, lighting switch, temperature controller, emergency stop |
Setting Style | Suspending steel hook from roof of building or steel column supporting. |
Technical Parameters of YS-300-C
Outside Dimension: (mm) | 6300×3450×2700mm(L*W*H) |
Inside Dimension: (mm) | 7550×3550×3400mm(L*W*H) |
Intake air Capacity: (m3/h) | 15500 |
Exhaust air Capacity: (m3/h) | 15500 |
Free Air Speed: (m/s) | ≥0.2 |
Frequency of Air Exchange: (time/h ) | 264 |
Max. Working Temperature | 25 |
Max. Heating Productivity | 100000 |
Illumination: (Lux) | ≥800 |
Efficiency of Air Filtration: | ≥95% |
Noise: dB(A) | <80 |
Total Power: (KW) | 12.2 |
4S store Auto Car Fast Repair Quick Fix Equipment Line
