Detailed Product Description
switching mode power supply
l COST EFFECTIVENESS
l LOW RIPPLE NOISE
l OVERVOLTAGE(V1), OVERLOAD PROTECTION
l CONTINUOUS SHORT CIRCUIT PROTECTION
l 100% FULL LOAD BURN IN TEST
l HIGH EFFICIENCY LOW WORKING TEMPERATURE
l APPLICATIONELECTRIC CONTROL TANK
SPECIFICATION ALL specification are typical at normal input,full load at 25 unless otherwise stated
INPUT | INPUT VOLTAGE | DC -60V~ -38V |
FREQUENCY | 47--63Hz | |
INRUSH CURRENT | 30A/230V,Cold Start | |
LEAKAGE CURRENT | <0.5mA/230VAC | |
OUTPUT | LINE REGULATION | ±5% max |
RIPPLE&NOISE<mVP-P>1 | <1% of output voltage | |
TEMPERATURE COEFFICIENT | ±0.02%/ | |
OUTPUT VOLTAGE | ±10% | |
START-UP TIME | ≤1S(ACIN230V,Io=100%) | |
HOLD-UP TIME | ≥20mS(ACIN230V,Io=100%) | |
PROTECTION FUNCTION | OVER LOAD PROTECTION | 105%--150% of Rating,automatic recovery |
OVER VOLTAGE PROTECTION | 115%--135% of Rating(V1) | |
ISOLATION | INPUT--OUTPUT | AC1500V,1minute |
INPUT--FG | AC1500V,1minute | |
OUTPUT--FG | AC500V,1minute | |
ISOLATION RESISTANCE | INPUT--OUTPUT | ≥50MΩ,500VDC |
INPUT--FG | ≥50MΩ,500VDC | |
OUTPUT--FG | ≥50MΩ,500VDC | |
ENVIRONMENT | OPERATION TEMPERATURE | 0--45,20%--90%RH(Non Condensing) |
STORAGE TEMPERATURE | -20--85,10%--95%RH(Non Condensing) | |
ALTITUDE | <2000m | |
STRUCTURE | COOLING | Natural convection cooling |
DIMENSIONS | 137.2×66×18 mm |
1 Figure is peak-to-peak .Output ripple is measured by using 20M oscilloscope
OUTPUT FEATURE
OUTPUT VOLTAGE | OUTPUT CURRENT | OUTPUT WATTAGE | EFFICIENCY | TOTAL REGULATION | MODEL | |
| Min | Max |
|
|
|
|
3.3V | 0.1A | 1.65A | 32W | 70% | ±2% | SW32-5AAC |
+6.85V | 0.1A | 2.05A | ±2% | |||
-5V | 0.1A | 0.05A | ±5% | |||
-30V | 0.1A | 0.072A | ±5% | |||
90V | 0.1A | 0.1A | ±5% | |||
