Welcome to ECBAY
CE ROHS 12V 500W LED switching power supply HS-500-12
CE ROHS 12V 500W LED switching power supply HS-500-12

1.12V 500W LED switching power supply 2.Constant voltage 3.CE&RoHs approved 4.2 years warranty 5.EMI filter installed

 12V500W LED switching power supply

Adjustable AC input voltage, 110V/220V

 High efficiency and low operation temperature

 Soft-start current can reduce the AC input impact effectively

 Short-circuit and overload protected

 100% full-load burn-in test, high reliability

 Installed with EMI filter, minimum wave.

 2 years warranty

Specification:

HS-500-12HS-500-13.5HS-500-15HS-500-24HS-500-27HS-500-48
Model
Specification
DC output voltage12V13.5V15V24V27V48V
Output voltage tolerance(Note:2)±2%±1%±1%±1%±1%±1%
Rated output current40A36A32A20A18A10A
Output current rage0-40A0-36A0-32A0-20A0-18A0-10A
Wave and noise(Note :3)240mVp-p240mVp-p240mVp-p240mVp-p240mVp-p300mVp-p
Inlet stability(Note :4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
Load stablity (Note :5)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%
Efficiency80%80%82%82%82%84%
AC input voltage range180-264VAC 47-63Hz;254-370VDC
Input current5A/230V
AC INrush current

50A/230V

Leakage current<3.5mA/240VAC
Overload protection105%~135% hiccup mode, auto recovery
Over voltage protection115%-135% cut off the output, auto recovery
High-temperature protectionERH3>=65°C~70°C Fan on,<=55°C~60°CFan off,>=80°C~85°C,Cut off output(5~15V)Cut off output(5~15)~(24~48V)
Temperature coefficient±0.03%/°C(0~50%)
Setup rise hold up time200ms,100ms,20ms
Vibration10~500Hz,2G 10min,/1cycle,Period for 60min,each axes
Withstand voltageInput and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC
Isolation resistanceInput and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity-10°C~+60°C(Refer to output derating curve),20%~90%RH
Store temperature and humidity-20°C~+85°C,10%~95%RH
Overall dimension238×124×65mm
Weight/Packing1.45Kgs, 12pc/CTN

Note:1.The testing condition for the parameter above is :230VAC input,rated load,25°C70% RH.Humidity.2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.

Mechanical Drawing:

  

CE ROHS 12V 500W LED switching power supply HS-500-12

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.