can be installed on DIN rail: TS-35/7.5or TS-35/15
| |||||||||
Features: ·Universal AC input ·Small volume,low weight,high efficiency ·Protections: short circuit/over load/over voltage·Cooling by free air convectio·Can be installed on DIN rail: TS-35/7.5or TS-35/15·LED indicator for power on·100% full load burn-in test·2 Year warranty |
| DR-120W | ||||
| Model | DR-120-12 | DR-120-24 | DR-120-48 | |
| Output | DC voltage | 12V | 24V | 48V |
| Voltage tolerance | ±2% | ±1% | ±1% | |
| Rated current | 8.3A | 5A | 2.5A | |
| Current range | 0~8.3A | 0~5A | 0~2.5A | |
| Rated power | 99.6W | 120W | 120W | |
| Ripple&noise | 100mvp-p | 120mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | |
| Input | Voltage range | 90~264VAC, 127~373VDC | ||
| Frequency | 47~63Hz | |||
| AC current | 2.6A/110VAC, 1.6A/220VAC | |||
| Efficiency | 82% | 84% | 85% | |
| Inrush current | Cold start current 25A/110VAC,45A/220VAC | |||
| Leakage current | < 1mA/240VAC | |||
| Protection | Over load | above 105%~135% rated power | ||
| protection type:rated current limit,auto-recovery after fault condition is removed | ||||
| Over voltage | 15.6~17.8V | 30.6~33.2V | 54.8~56.6V | |
| protection type:cutoff output, recovery after restart power | ||||
| Environment | Working temp,humidity | -20°C~+60°C, 20%~90%RH | ||
| Storagetemp,humidity | -40°C~+85°C,10%~95%RH non-condensing | |||
| Withstand vibration | 10~500Hz, 2G 10min/1cycle, period for 60 minutes, each axes | |||
| Safety | Withstand voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
| Fitstandard | Safety standard | Fit UL1012 | ||
| EMC standard | meet EN55022, CLASSA | |||
| Others | Dimension | 65.5*125.2*100mm (L*W*H) | ||
| Weight/packing | 0.8kg/20pcs/17kg/0.046m³/1.64CUFT | |||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||
DR series 120w guide rail switching power supply
