150W Single Output Switching Power Supply S-150 for good quality 1.AC input range selectable by switch. 2.2 years warranty.
150W Single Output Switching Power Supply S-150 for good quality1.AC input range selectable by switch.2.2 years warranty.
Features:
1. AC input selectable by switch
2. Protections: short circuit / overload/ over voltage
3. Cooling by free air convection
4. LED indicator for power on
5. 100% full load burn-in test
6. High efficiency, long life and high reliability
7. 2 years warranty
Model Specification | S-150-5 | S-150-7.5 | S-150-9 | S-150-12 | S-150-13.5 | S-150-15 | S-150-24 | S-150-27 | S-150-48 |
DC output voltage | 5V | 7.5V | 9V | 12V | 13.5V | 15V | 24V | 27V | 48V |
Output voltage error (Note2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
Rated output current | 30A | 20A | 16.7A | 12.5A | 11.2A | 10A | 6.5A | 5.6A | 3.2A |
Output current rage | 0-30A | 0-20A | 0-16.7A | 0-12.5A | 0-11.2A | 0-10A | 0-6.5A | 0-5.6A | 0-3.2A |
Wave and noise(Note3) | 150mVp-p | 150mVp-p | 180mV | 180mV | 180mV | 180mV | 240mV | 240mV | 240mV |
Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
Load stability(Note5) | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
DC output power | 150W | 150W | 150.3W | 150W | 151.2W | 150W | 156W | 151.2W | 153.6W |
Efficiency | 78% | 80% | 80% | 82% | 83% | 84% | 85% | 86% | 87% |
Adjustable range for DC voltage | 4.5-5.5V | 6-8.3V | 8-10.4V | 10.6-13.2V | 12-15V | 13.5-16.5V | 21-28V | 24-30V | 43-53V |
AC input voltage range | 85~132VAC/176~264VAC SELECTED BY JUMPER OR SWTCH 47~63Hz;255~370VDC | ||||||||
Input current | 3.2A/115V 1.6A/230V | ||||||||
AC impulse current | Cold-start current 35A/115V 60A/230V | ||||||||
Leakage current | <3.5mA/240VAC | ||||||||
Overload protection | 105~150 Type:PULSING HICCUP SHUTDOWN Reset:auto recovery | ||||||||
Over-voltage protection | 115%~135% | ||||||||
High-temperature protection | …… | ||||||||
Temperature coefficient | ±0.03%°C(0~50°C) | ||||||||
Setup rise hold up time | 100ms,50ms,20ms | ||||||||
Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,Each axes | ||||||||
Withstand voltage | Input and output interval:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | ||||||||
Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure:500VAC/100M Ohms | ||||||||
Working temperature and humidity | -10°C~+60°C,20%~90%RH | ||||||||
Store temperature and humidity | -20°C~+85°C,10%~95RH | ||||||||
Overall dimension | 199*110*50mm | ||||||||
Weight | 0.8Kgs | ||||||||
Safety standards | Meet UL1012,TUV EN60950 | ||||||||
EMC standards | Meet CLSPR22(EN55022), IEC801-2,3,4,IEC555-2 Verification | ||||||||
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note:5)3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test: The load is from 0% to 100%,others 60%.6.C2,3,11must be knocked down. |
150W Single Output Switching Power Supply S-150 for good quality