1.energy saving temperature controller 2.accuracy temperature controlling 3.30 years manufacture 4.CE,ISO certification,OEM
DKW-II electronic energy saving temperature controller
DKW-II electronic energy saving temperature controller Product Specification
With features of beautiful appearance,easy operating, lightweight and flexible,this temperature controller is the ideal experimental equipment to control the electric furnace and electric heating mantle to do the precise temperature control heating test.It is the alternative products of heavy coil regulator and it adopts high power thyristor to control the voltage,so it can make the heater control the heating under 0-220v.
DKW-II electronic energy saving temperature controller
Usage
Connect to the power supply.Plug the power line of the controlled heater into the socket behind the temperature controller.Switch 1 is the power switch,switch 2 is the choosing switch of direct heating and temperature adjustment.For the first time to heat ,the heated container should choose direct heating to heat quickly.When it approach the demanded temperature, adjust the switch to temperature adjustment,then adjust the temperature adjustment button.Make the solution in the container heated under the constant voltage according to the voltage and the brightness of the red light.
DKW-II electronic energy saving temperature controller
Technical parameter
1.power supply: ~220v 50hz(~110v 50/60hz)
2.output power :≤1500W(may provide more large power as demanding)
3.No-load power consumption:≤5W
4.controlling accuracy :±10°C
5.controlling mode :stepless voltage regulator,0-220v output,thyristor control the temperature
6.working voltage:AC 180-240v 50Hz
7.working time:≥8h
8.fuse pipe :ø5×20 15A
DKW-II electronic energy saving temperature controller
Attention
1.Please put the sensor with a glass tube to prevent corrosion when do the corrosive liquid measurement.
2.N0n-professionals please do not open the instrument.
3.Environmental temperature:0-50 °C,without corrosive gas.
4.Relative humidity:35%-85% (no condensation )
5.Do not overload use.
6.Instrument should be earthed well .
7.Long time no use ,please keep it clean and reserve it in a dry and without any corrosion air place .
school electronic energy saving temperature controller/DKW-II temperature controller
