1.multi-step programming temperature controller 2.precise temperature control 3.working voltage:AC 180-240v 4.CE,ISO
ZNBC-50 intelligent programming temperature controller
ZNBC-50 intelligent programming temperature controller
Product features
ZNBC-50 is the intelligent multi-step programming temperature controller that adopts microcomputer and thermal resistance to control the temperature.The equipment can achieve cooling speed control and constant temperature timing control.Varieties of parameters can be typed in on the panel.The equipment can adjust the control parameters automatically online.With the features of precise temperature control and wide rang usage,it can be applied to varieties of automatical temperature control occasions.
ZNBC-50 intelligent programming temperature controller
Technical parameter
1.power supply: ~220v 50hz
2.output power :≤1500W(may provide more large power as demanding)
3.No-load power consumption:≤5W
4.controlling accuracy :±0.5°C
5.resolution:±0.1°C
6.temperature range:room temperature to 399°C
7.temperature sensing signal:pt100
8.controlling mode :controlled silicon control the output,30 segment programming
9.working voltage:AC 180-240v 50Hz
10.working time:≥8h
11.environmental temperature:0-50 °C,without corrosive gas.
12.relative humidity:35%-85% (no condensation )
13.fuse pipe :ø5×20 15A
Intelligent Programming Temperature controller | ZNBC-30 | ±0.5/0.1 | Room tem- 399°C 30 section | ≤1500 | Microcomputer+professional PID control ,oblique line temperature rise ,can recycle automatically ,can modify in midway , can set power off memory to heat ,pt100 temperature sensor , among this 100 segment can make programme , each can limit the amplitude individually .100B type support RS485Serial communication ,so can be connected with computer . |
ZNBC-50 | ±0.5/0.1 | Room tem- 399°C 50 section | ≤1500 | ||
ZNBC-100A | ±1/0.1 | Room tem- 399°C 100 section | ≤1500 | ||
ZNBC-100B | ±1/0.1 | Room tem- 399°C 100 section | ≤1500 |
ZNBC-50 intelligent programming temperature controller
Attention
1.When the"SV"window shows"oral",it indicates that the sensor is open or short circuit or the actual temperature beyond the measurement rang of the meter.
2.Due to the affection of heating,thermal insulation and heating dissipation ,the control accuracy of the instrument may have deviation of 0.5%-2%.
3.Please put the sensor with a glass tube to prevent corrosion when do the corrosive liquid measurement.
4.Non-professionals please do not open the instrument.
5.Do not overload use.
6.Instrument should be earthed well .
7.Long time no use ,please keep it clean and reserve it in a dry and without any corrosion air place .
intelligent precise school programming temperature controller/ZNBC-50 temperature controller
