Lab open mixing mill widely used in rubbers and plastics industry for polymer mixing, such as PVC, color master batch.
MODEL NO.
DW5110
APPLICATION
DW5110 Lab open mixing mill . It is widely used in rubbers and plastics industry for polymer mixing, such as PVC, color master batch. It consists of roll, bearing, gap adjusting device, electric control system, safety device, etc.
STANDARDS
STANDARDS |
Note: this tester can conform to but not limit to the standards above, for more standards conformance, please contact us.
FEATURES
1, Cylindrical center-adjustable bearing;
2, Hard chromeplated steel rolls, rapid heat transfer, high hardness, high corrosionresistance;
3, Adjustable gap between the two rolls, high accuracy;
4, Electric heating optional for plastics experiments, sensitively and uniformly temperature control, high accuracy;
5, Water cooling optional for rubbers experiments;
6,With safety device.
KEY SPECIFICATION
Roll hardness | HRC 55~60 |
Roll diameter | 160mm |
Roll length | 320mm |
Roll linear speed | 0~20m.p.m |
Roll speed | 0~40rpm |
Gap adjusting device | manual, 0.1~6mm |
Feeding quantity | 1~2kg |
Reducer | gear reducer |
Safety device | touch type of emergency stop |
Electric power request | 3ph~380V, 26A |
Plastics experiment | Rubbers experiment | |
Speed ratio (front roll: back roll) | 1.25:1 | 1.35:1 |
Motor power | 1.5kw | 5.5kw |
Heating or cooling | Electric heating, 7kw | Water cooling |
Working temperature | Room temperature~300°C | Room temperature |
Temperature accuracy | ±3.5°C | |
Dimensions(L×W×H) | 1000×550×1250mm | 1100×600×1250mm |
Weight | Approx. 600kg | Approx. 650kg |
DW5110 Lab open mixing mill
