Thrust ball bearing with competitive price with lower noise and high quanlity
Thrust ball bearing Characteristics
Thrust ball bearing consist of shaft washer,house washer, steel balls and a cage, the ring matched shaft is called shaft washer, matched with housing called housing washer, if their installation surface profile of housing washer spherical, their bearing can be self aligned, which can reduce deviation of installation
These bearings mainly bear axial loads and can transfer big axial loads, it can not bear radial loads, they can be applied to steering stystem of automobile and mainly shaft of machinery
Thrust ball bearing Types
Thrust ball bearings supplied by RICH cover 2 types
Single direction thrust ball bearing
It can be separated, one shaft washer, two housing washers,one center shaft washer, steel ball cage individually, this bearing include 3 types
Bearing with flat housing washer
Bearing with self-aligning housing washer
Bearing with self-aligning washer and self aligning seat washer
Double direction thrust ball bearing
It can bear axial loads from double directions, and can locate the bearing from 2 direction
Thrust ball bearing Dimension range
Thrust ball bearings supplied by RICH are following
Inner diameter range:100mm-1380mm
Outer diameter range :135mm-1540mm
Tolerance
RICH standard of thrust ball bearing precision covers P0,P6,P5 and P4, confirm to the national standards
Thrust ball bearing Cage
Normallly pressed cage and solid cage are adopted for this type of bearings, other cages can be used for this type of bearing for special applications
If bearing max O.D. is 250mm, pressed steel cage adopted, cage type is not indicated of bearing specificaitons
If bearing min O.D. is 250mm, then solid brass cage adopted, and cage type is not indicated in the bearing speficaiton
Thrust Ball Bearing
