Tungsten Carbide Drawing Die
Sintered in Vacum Furnace ISO9001:2000 Certificate 100% Virgin Material Exported to Many Countries
| TUNGSTEN CARBIDE DRAWING DIES | ||||||
| GRADE AND SPECIFICATION FOR DRAWING DIES | ||||||
| Grade | Density | T.R.S | Hardness | Performance & application recommended | ||
| g/cm³ | MPa | HRA | ||||
| YG6X | 14.95 | 1800 | 91.5 | For drawing steel and nonferrous wires or bars of less than 6.00mm under not so much stress. | ||
| YG6 | 14.95 | 1900 | 90.5 | For drawing steel, nonferrous alloy bars of less than 20.00mm under more stress and also for drawing tubes of less than 10.00mm. | ||
| YG8 | 14.8 | 2200 | 89.5 | For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts. | ||
| YG10 | 14.5 | 2400 | 88.5 | |||
| YG15 | 14 | 2800 | 87 | For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting. | ||
| STANDARD TYPE OF TUNGSTEN CARBIDE DRAWING DIE | ||||||
| TYPE | (OD)ΦMM | (ID)ΦMM | (H)MM | |||
| S SERIES | S10~S60 | 8~140 | 0.4~80 | 6~60 | ||
| W SERIES | W103~W117 | 12~120 | 0.9~70 | 8~55 | ||
| R SERIES | R2~R17 | 8~102 | 0.4~75 | 8~38 | ||
| V SERIES | V15~V100 | 15~100 | 0.6~45 | 13~33 | ||
| STANDARD TYPE OF TUNGSTEN CARBIDE FINISHED DRAWING DIE | ||||||
| TYPE | NIB SIZE (MM) | STEEL CASE SIZE(MM) | ||||
| OD | H | ID | OD | H | ||
| S SERIES | S10~S60 | 8~140 | 6~60 | 0.4~80 | 28~200 | 12~70 |
| W SERIES | W103~W117 | 12~120 | 8~55 | 0.9~70 | 30~275 | 15~100 |
| R SERIES | R2~R17 | 8~102 | 8~38 | 0.4~75 | 38~229 | 19~76 |
Tungsten Carbide Drawing Die
