Filter Cartridge 1)Provides broad chemical compatibility 2)Narrow pore size 3)Thermally welded 4)100% integrity tested
HONGSHUN Hydrophilic PTFE Filter Cartridge
Performance Features:
1) Provides broad chemical compatibility
2) Narrow pore size distribution ensures the ultimate in retention and absolute construction with retention ratings if,0.1,0.22,0.45,1.0um
3) Thermally welded, eliminating adhesive extractbles
4) Variety of seal configurations allow retrofit in many filter vessel desigens
5) 100% integrity tested in production to ensure optimal quality product
Materials of Construction | |
Membrane | Hydrophilic PTFE |
Support Material | polypropylene |
End Caps | PP (222/226 with encapsulated stainless steel reinforcing ring) |
Core, Cage and End Caps | polyester |
O-Rings | Silicone/EPDM/Viton |
Sealing technology | Thermal Bonding |
Diameter | 2.7 inches (6.8 cm) |
Length | 5 inch ,10 inch, 20 inch, 30 inch,40 inch |
Typical Effective Filtration Area, ft2,≥5.8 ft2 (0.54 m2) per 10 inch | |
Nominal Pore Size(μm): 0.1um,0.22um,0.45um,1.0um | |
Maximum Temperature:90°C | |
Maximum Pressure | |
Forward: 5 bar at 21 °C; 2.4 bar at 70 °C | |
Bacterial Retention | |
for more information, please contact us | |
Extractables, per 10-inch cartridge | |
≤ 50 mg after 24-h soak in water | |
Effluent Particle Level | |
Meets the requirements of Chinese Pharmacopoeia 2010, Volume Ⅱ, appendix IX C. | |
Non-Fiber Releasing | |
Meets the criteria for a “non-fiber releasing” filter as defined in 21 CFR 210.3 (b) (6). | |
Toxicity | |
Component materials meet GB/T 14233.2<2005> of Chinese National Standard for Safety Tests. | |
TOC | |
< 500 ppb after a water flush of 60 liters per 10-inch cartridge | |
Multiple Sterilization Cycles | |
30 (B type support) / 15(N type support) steam-in-place sterilization or autoclave cycles of 30 min at 121°C | |
Oxidizable Substances: filtrate meets USP XXII requirements for purified water with <1 L flush after autoclaving | |
Endotoxins Level:< 0.25 EU/ml as determined by the LAL test | |
Good Manufacturing Practices | |
Manufactured in HONGSHUN facility which adheres to Good Manufacturing Practices. | |
Application
a) Solvents
b) Electronic
c) Medicine
d) Process water
e) Acids
f) Etchants
g) Photoresists
h) Alkalies
i) Polymer Filtration
j)
Cartridge Ordering Information
Notes:
Other specifications are available upon request.
OEM requirement can be met upon request.
For more details, please contact HONGSHUN filter.
Should any changes occur, the final edition shall prevail for all purposes.
Hydrophilic PTFE Filter Cartridge
