1.Model:FR11-4040(r o) 2.Reject(%):99.5 3.Average Permeate GPD(m3/d):2200(8.3) 4.Active Membrane Area ft2(m2):90(8.4)
Brief Introduction
FR (fouling resistant) series of aromatic polyamide RO membrane element developed by Vontron Technology Co., Ltd. is applicable to desalination of brackish water. It is characterized by low-pressure operation, higher water productivity and excellent desalting performance. Moreover, special treatment has been made to the surface of membrane with unique technology to change its electrical charge and smoothness, increasing the hydrophilicity of membrane surface, thus decreasing the adhesion of contamination and microbe so as to lessen the pollution and extend the service life of elements.
The FR series is designed for desalting treatment of such water with salt concentration less than 10,000 ppm as surface water, underground water, tap water and municipal water, etc. It is mailnly applied to treatment of various industrial water applications, such as reuse of industrial reclaimed water and boiler water replenishment for power plant, etc., and is particularly applicable to treatment of those water containing slight organic pollutants such as industrial wastewater, municipal sewage and other slightly contaminated water.
Specifications and Major Properties
Model | Active Membrane Area ft2(m2) | Average Permeated Flow GPD (m3/d) | Stable Rejection Rate (%) | Minimum Rejection Rate (%) |
FR11-8040 | 365(33.9) | 9600(36.3) | 99.5 | 99.3 |
FR11-4040 | 90(8.4) | 2200(8.3) | 99.5 | 99.3
|
Testing Conditions: Testing Pressure…………………………………225 psi (1.55Mpa)
Temperature of Testing Solution …………..…25 °C
Concentration of Testing Solution (NaCl)…….. 2000ppm
pH Value of Testing Solution ……………….….7.5
Recovery Rate of Single Membrane Element….15%
Operation limits and Conditions
Max. Working Pressure…………………………………………………… 600psi(4.14Mpa)
Max. Feedwater Flow…………………………………………………………75gpm (17 m3/h) (8040)
16gpm (3.6 m3/h) (4040)
Max. Feedwater Temperature…………………………………………… 45°C
Max. Feedwater SDI………………………………………………………… 5
Residual chlorine Concentration of Feedwater……………… <0.1ppm
pH Range of Feedwater during Continuous Operation… 3~10
pH Range of Feedwater during Chemical Cleaning……… 2~12
Max. Pressure Drop of Single Membrane Element………… 15psi(0.1Mpa)
Dimensions of Membrane Element
All dimensions are shown in: millimeter (inch)
Service Network
FR11-4040 Fouling Resistant r o membranes Element-vontron
