computer-controled temperature wax heater Au-8011B wax heater, wax warmer, wax pot, paraffin wax heater, easy use wax heater
computer-controled temperature wax heater Au-8011B
Paraffin Wax Heater Au-8011B is your smart choice! 1.Automatic constant temperature 2.With gloves Welcome all inquires!
General introduction:
Wax heater is Professional for hot and warm parrafin wax.The heating elements provide excellent distribution of heat and better wax consistency and easy maintenance.
Using steps:
Digital Wax Warmer:
1. Plug in and turn on the power.
2. Fix the temperature for melting the wax by TEMP(the temperature can be fixed at the highest for aluminum inner, 65°C for plastic inner),then press the button 0 to melt paraffin wax, the pilot lamp lights and the display shows the current temperature of wax.
It will be constant temperature when the pilot lamp extinguish. Follow this step until the waxes totally melt.
3. Fix the temperature needed (generally 50°C--60°C).Brush some wax on wrist to feel the temperature of wax fit or not before using.
4.Turn off the warmer and plug out after using.
Notices:
It takes about 120 minutes for plastic warmer to melt the wax, and 60 minutes for aluminum inner warmer. The time can be affected by the amount of wax.
Function steps:
1. Unpack the paraffin wax and smash them into small pieces to fill into the inner.
2. Then take off the accouterment, such as rings and bangles.
3. Clean and dray your hands.
4. Rubdown and scrap horniness on hands thoroughly.
5. Apply armguard cream and massage to help your hands absorb.
6. Put your hands and wrists into the wax. Do not curve your fingers.
7. Put your hand into the wax again when there is no more wax dripping, repeat 5 times.
8. Then put on plastic bags and cotton mittens to keep wax warm.
9. Take off cotton mittens after 10 minutes, and doff the plastic bags and wax from wrist to fingers.
10. Apply armguard cream and massage to help your hands absorb again.
11. Follow the same function steps to tend your feet.
Tips:
1. You must feel the temperature of wax on the wrist before using.
2. Don’t use on the injured skin.
3. Don’t use on skin with whelk.
4. Don’t pour the wax when it is melting. Please cool the wax first,then turn on the power to melt the bottom of wax and pour the whole wax.
5. Please wait at least 1 minute before turn on again.
6. Do use the same voltage as marked on the warmer.
7. Please turn on again when the warmer does not work.
The products accord with standard of Q/(GZ)YMMRBJ1-2005 and CE certification.
Elements Introduction:
Paraffin would make the skin velvet and soft, especially for the dry skin moisten; the effect in winter is salience. The method in use is easy. The product has a good reputation by beauticians all over the world, either in domestic consumer. It is different from other treatment; your customer dip in the professional wax, the skin will become velvet and soft at once.
Full capacity is 5L; MAX line is 3L; MIN line is 2L.
Specification:
Voltage:110V / 220V
Power:200W
G.W.:2kg
Pakage:43*28*24cm
computer-controled temperature wax heater Au-8011B
