1.single fiber Media converter ,1310/1550nm 2.10/100M,SC,RJ-45,80Km 3.three years warranty,Swift delivery
single fiber Media converter
Product introduction
Media converter is a phototelectricy transformation device ,which transfer ethernet electrical signal to optical signal or transfer optical signal to ethernet electrical signal,through converting the electrical signal to optical signal and then transmit them over multimode or single mode optical fiber.It break through the restriction of short distance transmision of cable ,combining with the optical fiber .it make us realize the long distance transmission of kilometers or even hundredkilometers ,under the precondition of guaranting the transmission of ethernet higher bandwidth channel .you will save many investments in the network if you using the optical fiber to construct net .it is a good solution to use optical fiber transceiver to solve current state of network ,which is the expensive network equipment ,optical fiber transmission is the ideal fiber optical transmission equipment of telecommunication ,radio and television industry.
Product features
1.meet the standard of 1EEE802.3 10 Base-T,1EEE802.3u 100 Base-TX,100 Base-FX, and 1EEE802.3z 1000Base-T
2.meet the standard of carrier-class,the average non-malfunction working time MTBF exceed 5 thousands hours
3.support full duplex and half duplex transmission mode ,auto-adapt
4.electric mouth adopt paralled lines or crossed lines automatically
5.the highly efficient exchange kernel inside can realize function of flow controlling CRC error inspection ,network segment cache size 1MBITs,MAC address capacity ,restraining broadcast storm address filtering .
6.proving one or more 10/100M auto adapt ,100Mbps or 10/100/100Mbps auto-adapt switching twisted –pair interface and one 155Mbps or 1.25Gbps optical interface
7.support the longest up to 1552byte, overlong packet transmisssion.
8.support QOS guarantee the delivery of packets
9.low power consumption ,low radiation ,long stable working time
10.providing dual fiber multimode ,or dual fiber single mode ,single fiber single mode or other optical fiber transmission
11.internal or external power supply
12.outlay power transceiver can match with 2U-14slot rack ,supply card transceiver and can match with 2U-16slot rack
13.double electric mouth ,support VLAN
Technical parameters
Standard | 1EEE802.3 10 Base-T,1EEE802.3u 100 Base-TX,100 Base-FX, |
Ethernet interface | one RJ45,two RJ45,four RJ45 |
optical interface | SC,FC |
Optical wave length | 850nm,1310nm,1550nm |
transmission speed | 10/100Mbps,10/100/1000 Mbps |
twisted pair | 10 Mbps, 100Mbps,1000 Mbps |
optical output power | -13~0 |
duplex mode | full duplex or half duplex |
twisted pair standard | STP/UP five kinds of twisted-pair |
single mode | 8.3/125,9/123,10/125μm |
power standard | input :AC220V ,DC-48v,DC24v,DC12V ,optional ,output : 5V,1A |
operating temperature | -10 degree--55 degree |
operating humidity | 5%-90% |
storage temperature | -40 degree—70 degree |
Update Date:2011-12-15 19:35:32
Single fiber media converter (1310/1550nm,80Km)